492960
35
Zoom out
Zoom in
Previous page
1/51
Next page
Troubleshooting > 35
Although no
print job is
sent, the
message
“Printing” is
displayed on
the control
panel (when
using the
parallel
interface).
Did you switch on the power of the computer after
switching on the power to the printer? Pressing the
CANCEL button cancels the printing.
Check that you switch on the power of the computer
before switching on the power to the printer.
Poor print
quality.
There may be a problem with the image. Refer to the
section after this, “When the Print Quality is Poor” to
rectify the problem.
“When the Print Quality is Poor” on page 36.
The correct
characters are
not printed
(printing
garbage).
The printer is printing with non-standard built-in
fonts. Check the fonts used in the application.
Download the necessary fonts when using PostScript.
The printout is
different from
what is
displayed on
the screen.
Did you change the TrueType font settings to printer
fonts? Change to TrueType font printing for Font
Substitution on the Setup tab of the printer driver.
Online Help for the printer driver
Waiting is
displayed but
nothing is
printed.
Printer is waiting for data from the host computer and
is in the middle of job. Sometimes a job is sent
without normal job termination characters.
Press and hold the ON LINE button for 3 seconds until
the printer flushes the job buffers and completes the
printing of this job. Alternatively, you can simply wait
for a timeout to occur, which will automatically flush
the buffers and complete the printing of the job. This
default timeout is normally 20 seconds and can be
adjusted with a control panel command.
Printing is very
slow.
The receive buffer is insufficient. When printing
documents of high resolution, reduce the memory
capacity of items not in use.
It is recommended to disable ports not in use, and
channel the memory to other purposes.
Is the printer driver set to 1200dpi on the Graphics
tab? Changing the setting to 600dpi will shorten the
print time.
For guidance refer to the online help in the printer
driver.
Printing with TrueType fonts may take up printing
time. Change the printing method for TrueType fonts
in Specify Font on the Detailed Settings tab of the
printer driver.
For guidance refer to the online help in the printer
driver.
Top s e ctio n of
printed
document is
missing.
Text i s
reduced.
Are the paper tray guides set in the correct positions?
Set the length guide and the right width guide in the
correct positions.
“Loading Paper” on page 27.
SYMPTOM REASON/ACTION
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki B730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki B730 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info