665295
136
Zoom out
Zoom in
Previous page
1/142
Next page
- 136 -
5
5. Troubleshooting
5. Troubleshooting
This chapter explains initializing, deleting and updating drivers.
Initializing
This section explains how to initialize a hard disk and ash memory and how to reset the printer
settings to their defaults.
You can delete data or settings stored on the printer to restore the settings to how they were at the
time of purchase.
Note
In the default settings, [Initialize] cannot be selected because [No] is selected for [Admin Setup], [Others Setup],
[Storage Common Setup], [Enable Initialization]. Set [Admin Setup], [Others Setup], [Storage Common Setup],
[Enable Initialization] to [Yes].
Memo
In order to access the [Admin Setup] menu, an administrator password is required. The default password is “aaaaaa”.
Initializing a hard disk
Carry out initialization of a hard disk when
inserting a hard disk that has been used in other
equipment or when the hard disk is not properly
recognized.
A hard disk is used as storage for spooling when
making multiple copies, for saving secure print/
encrypted print data, and for form data and
macros. Initialization deletes stored data.
A hard disk has three partitions. They are
PS, Common, and PCL. When a hard disk is
initialized, each partition is respectively divided
into the percentage specied (in the factory
default setting, PS: 30%, Common: 50%, PCL:
20%). You can also format particular partitions
individually.
If a hard disk that has been installed to another
device is installed to the printer, or if the hard
disk installed to the printer cannot be detected
anymore, [Initialize Yes/No] may appear on
the display when the printer is turned on. In
such a case, select [Yes]. (Data stored in the
hard disk is deleted.)
If [No] is selected, [Service call 067:Error]
may appears on the display. Turn off the printer
and detach the hard disk, or turn off the printer
and turn it back on with the hard disk left
installed, then select [Yes].
Formatting the Entire Area
You can format the entire area of the hard disk
installed in the printer.
Note
When you initialize the entire area of a hard disk, the
following data is deleted.
- Stored job data subject for [Secure Print],
[Encrypted Secure Print] or [Store for Re-print].
- Custom demo data
- Form data
1 Press the scroll button .
2 Press the scroll button to select
[Admin Setup] and then press the
<ENTER> button.
3 Enter the administrator password using
the ten-key pad.
The default password is “aaaaaa”.
4 Press the <ENTER> button.
5 Press the scroll button to select
[Others Setup] and then press the
<ENTER> button.
6 Press the scroll button to select [HDD
Setup] and then press the <ENTER>
button.
7 Make sure that [Initialize] is selected
and then press the <ENTER> button.
136


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki B721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki B721 in the language / languages: English as an attachment in your email.

The manual is 5,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki B721

Oki B721 User Manual - English - 157 pages

Oki B721 Additional guide - German, German - pages

Oki B721 User Manual - German - 175 pages

Oki B721 Additional guide - Dutch - 153 pages

Oki B721 User Manual - Dutch - 169 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info