493022
32
Zoom out
Zoom in
Previous page
1/88
Next page
Paper recommendations > 32
P
APER
RECOMMENDATIONS
For guidance on the media you can use with your printer, which input tray and which
ejection method to use, see the section entitled “Paper and tray information” in the
“Specifications” chapter.
P
APER
AND
ENVELOPE
TYPES
The manufacturer of this printer recommends the following guidelines when selecting paper
and envelopes for use in your printer:
> Paper and envelopes should be stored flat and away from moisture, direct sunlight
and heat sources.
> Use a smooth finished paper such as copier or laser type paper with a Sheffield
(smoothness) rating of 250 or less. If in doubt, please ask your paper supplier.
> Use paper and envelopes that are designed for use in laser type printers.
> The use of heavily laid or textured paper will seriously impact on the life of the
image drum.
> Do not use very smooth, shiny/glossy paper.
> Do not use heavily embossed headed paper.
> Do not use specially treated papers such as carbon paper, non-carbon paper,
thermal paper and impact paper.
> Avoid using paper with perforations, cut-outs and ragged edges.
> Do not use envelopes with windows or metal clasps.
> Do not use envelopes with self sealing flaps.
> Avoid using damaged or curled envelopes.
T
RANSPARENCIES
AND
ADHESIVE
LABELS
The manufacturer of this printer recommends the following guidelines when selecting
transparencies and adhesive labels for use in your printer:
> Always manually feed single sheets using a Manual Feed Tray or Multi Purpose Tray.
> Always use rear output.
> Media must be designed for use in laser printers or photocopiers and must be able to
withstand 200°C for 0.1 sec.
> Do not use media designed for use in colour laser printers and photocopiers.
> Labels should cover entire carrier sheet.
> Carrier sheet or adhesive must not be exposed to any part of the printer.
NOTE
The reference to Manual Feed Tray is for the B401dn, B411d, B411dn models
and the Multi Purpose Tray is for the B431d, B431dn models.
NOTE
You can use Thermal resistant transparencies used for Over Head Projectors.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki B411 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki B411 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info