515922
33
Zoom out
Zoom in
Previous page
1/87
Next page
Paper recommendations > 33
2. Adjust the rear paper support (4) to the size of paper you are using by gripping the
lug, tilting and sliding the support forwards or backwards as necessary.
3. Adjust the paper guides (5) by gripping the lug and moving it backwards or forwards
to match the size of the paper used. It is important to adjust the paper guides
correctly to ensure that the paper is not skewed in the print process. Paper jams
may occur if this operation is not carried out correctly.
4. Replace the tray in the printer.
Face up and face down printing
For face down printing, make sure the Rear stacker is closed (the paper exits from the top
of the printer). The Output Stacker on the top of the printer stacks printed pages face down,
capacity 150 sheets of weight 80g/m². Pages printed in reading order (page 1 first) will be
sorted in reading order (last page on top, facing down).
The face up stacker should be opened and the tray extension pulled out when required for
use. (With the face up stacker either opened or closed, the driver setting of face down will
successfully direct prints to the face down stacker.)
The face up stacker can hold up to 100 sheets 80g/m² standard paper.
Always use this stacker in conjunction with the Manual Feed Tray, Multi Purpose Tray or for
heavyweight stocks to reduce the possibility of paper jams.
See “Paper and tray information” on page 80.
Automatic feed sequence
With no optional feed trays installed, the Autotray function in the Print Menu is set by
default to ON and the Tray sequence function is set to DOWN. In this way, if a tray runs
out of paper, automatic feed will take place in the order Tray 1, Tray 2 (if fitted), Multi
Purpose Tray or the Manual Feed Tray, provided that these trays are set up for identical
media. Also, configure the media size and media weight for the respective trays in the
operator panel or Configuration Tool, depending on your printer model.
NOTE
If you have the optional second paper tray (Tray 2) and you are printing from
the first (upper) tray (Tray 1), you can pull out the second (lower) tray to
reload it. However, if printing from the second (lower) tray, do not pull out the
first (upper) tray as this will result in a paper jam.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki B 431D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki B 431D in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki B 431D

Oki B 431D User Manual - German - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info