Chapter 7 Child’s bicycle seat OKBABY ERGON Page 67
Instructions for use and assembly LIB040R04 Edition: 05-2005
7 Use
Illustration 1:
Adjusting the footrests:
To adjust the height of the footrests (15)
rotate the adjustment lever (16) upwards,
and when you have found the desired
position, rotate the adjustment lever
downwards to fix the footrests in the
desired position.
Illustration 2:
Blocking and releasing the child‘s feet:
Always make sure that your child’s feet
are well fastened to the footrests. The
strap is long for easy adjustment.
To unhook the strap 20, lift it outwards
and free it from the bridge trapping it.
WARNING! Do not tighten the belt
on the child’s feet too tightly, you could
hurt him/her or he/she could get cramp
during the ride.
DANGER! When you have
fastened the child’s feet, it is very
important to see if the child is able free
them on its own, pulling the child's leg up
in order to check the hold.
DANGER! The child may manage
to easily pull out its feet out of its shoes,
leaving them fixed to the footrest by the
strap 20. To prevent this from happening,
always check that your child’s shoe is
securely laced onto its foot.
ENGLISH
Instructions for use and assembly LIB040R04 Edition: 05-2005
Chapter 6 Child’s bicycle seat OKBABY ERGON Page 66
Illustration 8:
Fixing the footrests:
Fasten the footrests (15) by inserting
them in the top notch on the rack, while
keeping the safety strap clamps on the
outside of the seat as shown in the
diagram.
For each footrest, insert the regulating pin
(16) from the outside of the seat towards
the inside, making sure that the right pin
meets the right side and vice versa.
ATTENTION! Both of the pins and
sides of the seat are marked with
DX=right and SX=left.
Illustration 9:
Extracting the footrests:
Extract the footrest by turning the
regulating lever (16) upwards and slide
the footrest (15) up as high as possible,
pulling the regulating lever outwards to
free the support.
ENGLISH
15 16
16 15
20
DX
DX
15 16
