773002
8
Zoom out
Zoom in
Previous page
1/61
Next page
10 11
ENGLISH
ENGLISH
Rear child‘s seat Eggy / Eggy RelaxRear child‘s seat Eggy / Eggy Relax
Illustration 6:
Insert the two ends of the support arm (5) into the fastening block
holes (7). When the seat is correctly in place, tighten the screws (8)
slowly and evenly until the fastening block stops rotating around the
frame. Slide the cover (13) over the front part of the fastening block
(7). Cover the counter-block (6) with the protection cover (12) (see
illustration 1).
Illustration 7:
Adjust the vertical and horizontal position of the child seat accord-
ing to parameters seen in the figure. The barycentre (see ill., red
ring) must not be over 10cm behind the wheel axis. If necessary,
correct the horizontal position of the child seat as described in il-
lustration 8.
Illustration 8:
Correcting horizontal position.
Phase 1 : Press the two halves of the locking pin handle together so
that the safety clip opens.
Phase 2 : Turn the locking pin 90° downwards.
Phase 3 : Move the child seat horizontally until you find the right
position.
Phase 4 : Fix the support as shown in illustration 5.
Illustration 9:
Fastening the footrests: Place the footrest marked “SX” in the high-
est position of the seat’s left leg. Insert the adjusting pin marked
“SX” from the outside of the child seat inwards. Repeat the opera-
tions for the right footrest and relative adjusting pin, marked “DX”.
Using the seat:
Illustration 10:
Only for Eggy Relax: Inclining the child seat. To set the inclination
of the child seat, pull the release knob (E) upwards. Hold the release
knob upwards, and with your other hand incline the seat to the
desired position. Then let go of the release knob (E).
Illustrations 11-12:
Adjusting the footrest height. Rotate the adjusting pin upwards and
move the footrest to the desired position. Once in the desired posi-
tion, block the footrest by rotating the adjusting pin downwards.
Illustration 13:
Fastening the child’s safety belt: Adjust the height and length of the
belts according to the size of the child. Setting belt height: the belt
can be extracted to adjust its height by inserting the buckle behind
the backrest through the opening each time. Choose the upper or
lower openings to fix the belts based on the child’s height. Setting
belt length: modify belt length by sliding the buckles. The belts
must be fastened firmly without them being too tight for the child.
Fastening the belts: Fasten the belt clasp. Check that the belt clasp
clicks shut properly, and then pull the belt.
Illustration 14:
To unfasten the belt, simultaneously press the two buttons (front
and rear) found on the clasp. The clasp will open.
Illustration 15:
Fastening and unfastening the child’s feet: to secure the child’s feet,
secure the strap on the external side of the foot in the clasp on the
rest.
Always make sure your child’s feet are well fastened to the foot-
rests. The foot strap is long for easy adjustment.
Illustration 16:
Removing the child seat. Press the release button on the fasten-
ing block (7) and remove the child seat. To hook the seat on again,
insert the support arm (5) in the two fixing block holes (7) until the
lever clicks (fig.6).
Maintenance
1) Clean the seat, the padding and the belts with warm water and
a mild detergent. Do not use solvents or abrasive or corrosive
detergents. Leave the padding to dry in the open air out.
2) Seat repairs and replacement of damaged components must
only be carried out by authorized personnel.
Technical specifications
Product Child bike seat OKBABY
mod. Eggy / Eggy Relax
Dimensions 40x34x80 CM (LxDxH
Weight 4.4Kg
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Okbaby Eggy Relax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Okbaby Eggy Relax in the language / languages: All languages as an attachment in your email.

The manual is 18.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info