783122
25
Zoom out
Zoom in
Previous page
1/30
Next page
25
CHILD PROTECTION
10 Once the child protection is activated, the settings cannot be changed. The
washing machine can only be switched o with the program selector turned
to o (AUS / STOPP), whereby settings and wash progress are saved and the
washing process can be continued after switching the machine back on. The child
protection can only be activated if the washing machine operation was started or
is running either directly or by time delay.
1. Activation: Press the Startzeitverzögerung und Funktion buttons at once for
at least 3 seconds until an audible signal sounds 3 times. The corresponding
symbol of the control panel indicates the child protection .
2. De-activation: Press the Startzeitverzögerung und Funktion buttons again
at once for at least 3 seconds until an audible signal sounds 3 times. The
corresponding symbol of the control panel turns o.
CLEANING AND CARE
Warning
When cleaning, never use solvents or abrasive materials, hard brushes, metallic or
sharp objects. Solvents are harmful to human health and can attack plastic parts,
while abrasive cleaning mechanisms and tools may scratch the surface(s).
Switch o the washing machine and let it cool down completely before cleaning.
Clean the exterior surfaces of the product with a slightly damp cloth and dry them
well. Make sure that no water enters the product interior (e.g. at the buttons).
11 Cleaning the detergent box
Press the tab and lift up the detergent box.
Wash the chambers with water.
If necessary, use a soft brush to clean the housing.
Dry it with a soft cloth and re-insert the detergent box.
12 Cleaning the filter of the lye pump
Caution
Never operate the washing machine without a filter.
The filter of the lye pump prevents foreign objects from entering and
possibly damaging the pumping system.
Clean the filter regularly depending on the frequency of use,
approximately once a month.
Check the filter if the water is not pumped out or if the noise is increased
during pumping.
Before opening the service flap, place a big cloth in front and below the
flap. Large amounts of water may leak when removing the filter.
Make sure that all water has been pumped out during the previous wash cycle,
then turn o the product and unplug the power cord.
Place a big piece of cloth and a collecting tray in front of the service flap to catch
any leaking water.
Open the maintenance flap.
Turn the filter cover to the left. Catch leaking water!
Clean the filter under running water and remove any foreign objects.
Insert the filter and turn it to the right. Make sure that the filter is properly
fastened so that no water can leak.
Close the maintenance flap.
IM_OWM 5212 D_A5_DE_EN_210218_V04_HR.indb 25IM_OWM 5212 D_A5_DE_EN_210218_V04_HR.indb 25 18/2/2021 3:49 PM18/2/2021 3:49 PM
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OWM 5212 D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OWM 5212 D in the language / languages: English, German as an attachment in your email.

The manual is 3.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info