783122
21
Zoom out
Zoom in
Previous page
1/30
Next page
21
INSTALLATION
Note: The washing machine is equipped with power cord and plug and needs sewage
and tap water connections. Before installation, make sure that suitable connections are
at the desired place of installation.
Consider the dimensions (chapter Technical data) of the product for placing and
installation.
Caution
Before initial operation the transport restraints must be removed from the backside
of the unit. Operating the washing machine with mounted transport restraints leads
to serious damages.
Keep the transport restraints for later use. Never transport the device without
correctly mounted transport restraints!
1 Loosen the four transport restraints with a wrench (13 mm) and unscrew them
completely. Insert the 4 supplied blind plugs in the holes.
2 Place the washing machine on an even, horizontal and steady surface. For levelling,
the feet are adjustable and can be screwed in or out.
If the feet cannot be loosened by hand, use pliers.
Turn the feet to the right to screw them in and to the left to unscrew them.
Use a spirit level to check whether the appliance is levelled. If the appliance is
not standing horizontally or is tilted, the feet must be adjusted again.
If the unit is levelled and does not tilt, tighten the nuts with an open-end wrench.
Note:
Note the following, when placing the appliance on a platform:
The appliance might move during spinning and could fall of a platform. To prevent
this, the feet must be secured with retaining tabs (available in specialized stores).
3 The washing machine must be connected to a drain.
The drain hose is already fixed to the sewage connection. Pull the hose out of
the clamps and unwind it.
Connect the other end to the drain pipe (option A or B). Observe the max.
height of the hose end.
Note:
To avoid leakage, a hose clamp should be used to correctly install the outlet
hose.
Suitable hose holders are available as optional accessories.
4 Connect the water inlet to the water system (3/4“) using the supplied hose and
make sure that everything is connected correctly and firmly. The water pressure
must be between 0.05MPa and 1 MPa. A pressure reducing valve must be used if
the water pressure exceeds 1 MPa. The correct installation of the water connection
should be checked on a regular basis.
Note:
If the water pipes are new or have not been used for an extended period of time,
allow a certain amount of water to drain until you are sure that the water is clear
and free of foreign objects.
If this point is not observed, there is a risk that the water inlet will become
clogged and the unit will be damaged.
5 Plug the mains plug into a suitable socket.
IM_OWM 5212 D_A5_DE_EN_210218_V04_HR.indb 21IM_OWM 5212 D_A5_DE_EN_210218_V04_HR.indb 21 18/2/2021 3:49 PM18/2/2021 3:49 PM
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OWM 5212 D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OWM 5212 D in the language / languages: English, German as an attachment in your email.

The manual is 3.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info