783113
10
Zoom out
Zoom in
Previous page
1/54
Next page
10
En
Changing of the dust bag
Fig. 11 If the dustbag ll indicator shows red or if the suction power diminishes, the dust bag must
be changed and the lters must be cleaned.
Open the lid and remove the dust bag by taking it out of the dust bag holder.
Insert a new dust bag into the dust bag holder and close the lid.
Cleaning the motor lter
Fig. 12 Remove the motor lter and tap it to remove the dust. Then re-insert it. Insert the lter in the
right direction so that the correct side is facing the motor. The side which faced the dust bin
before should not face the motor when re-inserting it again.
Warning: Never use the vacuum cleaner without a motor lter, as otherwise, the motor will
soon get dirty and will be subject to wear. If the motor lter gets dirty, the suction power will
diminish.
Reassemble all of the components that have previously been removed. Assembly is carried
out in reverse order.
Cleaning the exhaust air lter
Fig. 13 Open the ap, take the lter out and tap it to remove the dust. Assembly is carried out in
reverse order.
TROUBLESHOOTING
If there are any problems during operation, please refer to the following table. If problems cannot be
solved as indicated under Solution, please contact your manufacturer.
Problem Possible causes Solution
Product does not work • Interrupted power supply • Check the power supply
Product cannot absorb dust or
loose suction power
• Filters are blocked with dirt
• Dust container full
• Suction hose/ telescopic tube
blocked with dirt
• Clean and wash the lters
• Empty the dust container
• Clean and wash the suction
hose/telescopic tube
SPECIFICATION
Rated voltage : 220 - 240 V~ 50/60 Hz
Rated power input : 800 W
Protection class : II
• This is a general purpose vacuum cleaner
• The Erp test method is according to (EU) No 666/2013 +Amd. (EU) 2016/2282; (EU) No 665/2013
+Amd. (EU) 2017/254; EN 60312-1:2017; EN 60704-1:2010/A11:2012 & EN 60704-2-1:2015
• Please refer to below website for detail technical information, or contact the manufacturer for
technical document: www.ok-online.com
DISPOSAL
The crossed-out wheeled bin logo requires the separate collection of waste electric and
electronic equipment (WEEE). Electric and electronic equipment may contain dangerous and
hazardous substances. Do not dispose of this appliance as unsorted municipal waste. Return it
to a designated collection point for the recycling of WEEE. By doing so, you will help to conserve
resources and protect the environment. Contact your retailer or local authorities for more
information.
IM_OVC3114A_180103_V05_HR.indb 10 3/1/18 6:28 pm
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OVC 3114 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OVC 3114 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 5.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info