782965
12
Zoom out
Zoom in
Previous page
1/74
Next page
Size = A5
EN 12
INSTALLATION
You can connect the device to an external amplifier or play the music through the
built-in speakers.
Note: If you would like to connect an external device with this product, a
good quality shielded cable must be used, which ensures the electromagnetic
compatibility of the product and the used cable as a whole.
Fig.  1 To connect to an external amplifier, insert an audio cinch cable into the
LINE OUT L R outputs. Make sure that the plugs are connected to the
correct connectors (red and white) according to their color. Plug the
other end of the RCA cable into the Line In connector on your amplifier.
Music that is now played on the turntable is output through the external
amplifier or speaker.
Attention! Do not use the phono connection of your amplifier to connect
the turntable. Damage to your amplifier and turntable is possible.
Fig.  2 Use the AUX input to connect an external playback device using a 3.5mm
jack cable. Also observe the operating instructions of the playback
device.
Fig.  3 Place the turntable mat on the turntable, align it and smooth it out if
necessary.
Fig.  4 Plug the DC plug of the power supply into the 5V DC port on the back of
the device.
OPERATION
Fig.  5 Plug the power adapter into a power outlet.
Fig.  6 Place the desired record on the turntable or on the turntable mat.
Observe the rpm data on the record label. Set the correct speed, 33 (LPs
and large records), 45 (singles and small records) or 78 rpm (gramophone
records) with the speed selector.
For records such as singles with a speed of 45 (min-1), use the supplied
adapter. First put the adapter over the pin and then place the record on it.
Fig.  7 Pull the pickup and needle cap o to the front.
Fig.  8 Turn on the turntable by turning the volume knob to the right. Do not
turn it too loud, but just to the extent that the operation control LED is lit.
Fig.  9 Flip the tone arm lock to the right and push the tone arm lift lever
backward. Now, swing the pickup or needle over the outermost grooves
on the record or over the desired location and slowly pull the tone arm lift
lever forward to lower the needle.
Fig.  10 Now set the desired volume with the volume control.
IM_OTT100_200409_V05_HR.indb 12 9/4/2020 14:06
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OTT 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OTT 100 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 5.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info