Manual OK OTD 71112 (page 20 of 42) (English, German, Dutch, French)

783097

Zoom out

Zoom in

1/42

ADDITIONAL FUNCTIONS

Delayed drying (Startzeitvorwahl)

7 If you wish to postpone the drying process, a time delay can be set. Use the time delay button

(Startzeitvorwahl) to set a postponed start between 1-24 hours. The dryer starts the drying process

after the preset time has elapsed.

1. Fill the drum with your clothes and close the door.

2. Switch ON the appliance with the On/O switch (Ein/Aus).

3. Chose your program and an additional function if needed (e.g. Anti-Crease).

4. Push the button delay (Startzeitvorwahl) for as many times as needed to set the time delay in

hours (h) which is indicated by the LED in the time delay display.

5. Push the button Start/Pause. The dryer is activated and will start the drying process once the

preset time has elapsed.

6. Push the button Start/Pause to pause the timer. For cancellation push the On/O switch (Ein/Aus).

Child protection (Kindersicherung)

8 Once the child protection is activated, the setting cannot be changed. In that case the dryer can

only be switched o by pushing the On/O switch (Ein/Aus). The child protection can only be

activated if the dryer operation was started or is running either directly or by time delay.

1. Activation: Press the anti-crease button (Knitterschutz) and the delay button

(Startzeitvorwahl) at once and for more than 3 seconds. The corresponding LED of the control

panel indicates the child protection (Kindersicherung).

2. De-activation: Press the buttons anti-crease (Knitterschutz) and delay (Startzeitvorwahl)

at once and for more than 3 seconds. The corresponding LED of the control panel

(Kindersicherung) turns o.

Anti-crease function (Knitterschutz)

9 This function is used to minimize the appearance of crease after the drying process is nished. The

standard time for this function is 30 minutes. The drum rotates intermittently in order to minimize

formation of crease.

• Press anti-crease (Knitterschutz) and the related LED lights on.

Intensity

10 Press the button Intensity to select additional dryness levels for the laundry. Three levels can be

choosen. The drying time increases 3 minutes in every level.

• Intensity function can be activated only before the program start.

• Pess the Intensity button repeatedly to select the additional drying time.

Signal

11 Press the Signal button to select acoustic signal function being on or o.

CLEANING AND CARE

• Warning! When cleaning, never use solvents or abrasive materials, hard brushes, metallic or sharp

objects. Solvents are harmful to human health and can attack plastic parts, while abrasive cleaning

mechanisms and tools may scratch the surface(s).

• Warning! Switch o the tumble dryer and let it cool down completely before cleaning.

• Clean the exterior surfaces of the product with a slightly damp cloth and dry them well. Make sure

that no water enters the product interior (e.g. at the control wheel).

Cleaning the lint lter

The LED Filter on the control panel will indicate when the air inlet needs to be cleaned.

12 Pull out the lter and open it. Remove lint and bers by hand. Wash the lter with tap water in order

to remove remaining lint or particles.

Reassembling is done in reverse order.

IM_OTD71116_181008_V04_HR.indb 20 8/10/18 5:05 pm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of OK OTD 71112 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

OK OTD 71112 Manual

Product: