783097
16
Zoom out
Zoom in
Previous page
1/42
Next page
16
CONTROLS AND COMPONENTS
A. Operation panel
a1 Program selection knob
a2 Display
a3 Display of additional functions and status
a4 Ein/Aus (on/o) button
a5 Start/Pause button
a6 Signal button
a7 Intensität (intensity) button
a8 Startzeitvorwahl (delay) button
a9 Knitterschutz (anti-crease) button
B. Power cord with plug
C. Drum
D. Lint lter
E. Adjustable feet
F. Handle
G. Door with window
H. Exhaust outlet (rear side)
CONTENT
1 x Air Vented Dryer
1 x Exhaust hose
1 x User manual
1 x Warranty card
BEFORE FIRST TIME USE
• Remove the product and accessories carefully from the original packaging. It is recommended to keep
the original packaging for storage. If you wish to dispose of the original packaging, please observe
applicable legal provisions. Should you have any questions regarding proper disposal, contact your
local waste management center.
• Inspect the delivery contents for completeness and damages. Should the delivery contents be
incomplete or damaged, contact your sales outlet immediately.
• After unpacking, please refer to chapter Cleaning and Care.
INSTALLATION
Note: The air vented dryer is equipped with power cord and plug. Before installation, make sure that a
wall outlet is at the desired place of installation.
Consider the dimension of the product for placing and installation.
1 Place the tumble dryer on an even, horizontal and steady surface. For levelling the feet are
adjustable and can be screwed in or out. Use a level to ensure that the device is in a horizontal
position.
Make sure to keep the minimum clearance to the rear side.
Installing the exhaust hose
2 Connect the end of the ex tube with the ange to the air outlet at the backside of the device and
turn it until it is xed tightly.
3 Warning! The exhaust air must not be discharged into a ue which is used for exhausting fumes
from appliance burning gas or other fuels.
The other end of ex tube has to be extended to an outdoor area or a proper ventilation pit.
4 Connect the power plug to the mains socket.
IM_OTD71116_181008_V04_HR.indb 16 8/10/18 5:05 pm
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OTD 71112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OTD 71112 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info