782941
12
Zoom out
Zoom in
Previous page
1/14
Next page
12
EN
SET AND ACTIVATE ALARM
The alarm can only be activated when the product is switched o, means in standby mode.
Set Alarm 1/2:
1. Press the AL.1 or AL.2 button for about 3 seconds.
2. Use the buttons to set the hours and conrm by pressing the AL.1 or AL.2 button. Now
set the minutes as well and conrm by pressing the key AL.1 or AL.2.
3. Now select the alarm signal, Buzzer (bU), USB (uSB) or Radio (rAd) with the key and
conrm again by pressing the AL.1 or AL.2 key. The setting is completed.
4. The alarm times Alarm 1 (AL.1) or Alarm 2 (AL.2) can be activated/deactivated by pressing the
AL.1 or AL.2 button again when the product is switched on/o.
Stop the alarm
1. Snooze function: By pressing the SLP./SN. button the alarm tone is only interrupted for a few
minutes and sounds again after approx. 9 minutes. The set alarm symbol ashes.
2. Press the AL.1 or AL.2 button to turn o the alarm tone.
OPERATION
6Switching on and o
Press the /FUNC. button to turn on the radio. To turn o the radio press and hold the buttton
/FUNC. approx. 3 seconds.
7Mode selection
Press the /FUNC. button to select a mode in following order Radio > USB .
8Volume control
The volume can be easily controlled by pressing the buttons VOL+ or VOL-. The volume will be
shown on display for a moment.
RADIO MODE
Automatic station search and program memory
The product is equipped with automatic station search function and stores the received radio station
independently.
1. Press and hold the AMS button for about 2 seconds, then release. The automatic station search
starts and the received radio stations are automatically stored.
2. When nished, you can recall the stored radio stations using the PRE.+ / or PRE- / buttons.
9Set radio station manually
Select the FM radio mode (FM). Press the buttons to set the desired frequency manually.
Notes:
For better FM reception: Fully extend the antenna.
IM_ORC10_181022_V02_HR.indb 12 22/10/18 5:36 pm
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK ORC 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK ORC 10 in the language / languages: English, German as an attachment in your email.

The manual is 3.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info