568763
15
Zoom out
Zoom in
Previous page
1/62
Next page
15
EN
INTENDED USE
This appliance is only intended for preparing juices. This appliance is only suitable for private household
use and it is not designed for commercial purpose. Every other type of use can lead to damage to the
appliance or injury.
BEFORE FIRST TIME USE
• Remove all packaging materials.
• Check for completeness and transport damage. In case of damages or incomplete delivery please
contact your dealer.
• Clean the appliance (
Cleaning and care).
• Note: Due to the manufacturing process, the appliance may emit a slight burning odour when
switched on for the rst time. This is normal and does not indicate any defect or hazard.
COMPONENTS
Fold out front and rear page for product illustrations.
1. Pusher
2. Lid with feeding chute
3. Locking groove
4. Stainless steel sieve with blade
5. Receptacle with lip
6. Spout
7. Base with motor
8. Juice container
9. Locking bar
10. Power cord with power plug
11. Anti-slip rubber feet
12. On/o switch (O, I, II, P)
13. Pulp container holder
14. Pulp container
ASSEMBLY
WARNING! Never connect the power plug into an electrical outlet before the appliance is fully
assembled.
1
Place the base on a dry, at, and steady surface. Press the base rmly on the surface so that the
suction feet get a good grip.
2
Place the receptacle on the base. Make sure the spout and lip rest in place.
3
Attaching the pulp container: Insert its upper part under the receptacle lip. Push the lower part
rmly into the pulp container holder.
4
Insert the stainless steel sieve inside the receptacle, matching its bottom with the base shaft.
5
Lock the sieve in place: Press the sieve edge downward until a click is heard.
6
Place the lid on the juicer.
7
Lock the bar: Lift up the locking bar until it ts the locking grooves on both sides of the lid.
8
Insert the pusher into the feeding chute. Make sure the notch of the pusher ts the ridge on the
feeding chute top.
9
Place the juice container underneath the spout.
Now the appliance is assembled and ready for use.
IM_OPJ103_140515_V05.indb 15 5/15/14 10:24 AM
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OPJ 103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OPJ 103 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info