782934
31
Zoom out
Zoom in
Previous page
1/132
Next page
31
EN
31 EN
TROUBLESHOOTING
If there are any problems during operation, please refer to the following table. If problems cannot be
solved as indicated under Solution, please contact your manufacturer.
Problem Possible causes Solution
No picture or sound • Interrupted power
supply
• Ensure the power button is on.
• Ensure the power outlet is operational.
• Ensure the power cord is not damaged.
• Ensure the power plug is connected  rmly to the
outlet.
Picture but no sound • Interrupted audio
connection
• Ensure the audio jacks are securely connected.
• Ensure the audio connector is not damaged.
• Ensure the volume is turned up in VOUCH setup.
• Ensure you have set the player’s AUDIO settings
correctly.
• Ensure you have entered the correct AV input for
your TV.
• Ensure the audio is not set to mute.
Sound but no picture • Interrupted video
connection
• Ensure the video jacks are securely connected.
• Ensure you have entered the correct AV input for
your TV.
• Ensure the video connector is not damaged.
• Ensure you have set the player’s VIDEO settings
correctly.
Poor picture or
sound
• Audio setting not
correct
• Poor DVD quality
• AV connector loosen
• Ensure you have set the player’s AUDIO settings
correctly.
• Ensure the disc is not scratched or stained.
• Ensure the AV connector or the output terminal is
not damaged.
BAD DISC displayed • Poor DVD quality • Ensure the disc is not warped, damaged or
deformed.
• Ensure the disc is not badly stained or damaged.
• Ensure the disc format is compatible with the
player.
• Please check whether you have tried to play a
software CD. If so, please restart the player.
Remote not working • Interrupted power
supply
• Batterries are empty
• Obstacles between the
remote control and
DVD player
• Make sure the Main units POWER button is on.
• Ensure the remote batteries are working.
• Point the remote control directly at the player’s IR
sensor.
• Remove any obstacles between the remote and
the IR sensor.
Unit not working • Due to electrostatic
discharge
• Turn o the power, and then turn it on again.
NO DISC displayed • Poor DVD quality
• DVD was insert wrongly
• Ensure you have put the disc on the tray.
• Ensure the disc is not upside down.
• Ensure the disc is not distorted, stained or
scratched.
No playback of ACC/
WMA  les
• The product only
support MP2/MP3/AC3
les.
• Insert media source with MP2/MP3/AC3  les.
No playback of
Divx3.11/4/5/6  les.
• The product only
support MPEG2/
MPEG4/XVID  les.
• Insert media source with MPEG2 (not higher than
720 x 576)/ MPEG4 (not higher than 800 x 600) /
XVID  les
IM_OPD250_171227_V03_HR.indb 31 27/12/17 2:26 pm
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OPD 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OPD 250 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 7.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info