568698

OK OMX 103 Manual

14
Zoom out
Zoom in
Previous page
1/50
Next page
14
EN
FILLING DURING OPERATION
8
Turn the lling cap anti-clockwise and remove it.
9
Fill with ingredients.
10
Re-insert the lling cap into the lid opening section and turn it clockwise.
Caution: Never use this product to mix with hot oil or fat.
11
Turn the control knob to 0 and remove the blender jar from the motor block.
12
Open the lid and pour out the content.
TIPS FOR USE
• To achieve the best results for pureeing solid ingredients, only insert these into the blender in small
portions rather than lling a large amount at once.
• If you are working with solid ingredients, cut these into small pieces (2-3 cm).
• Start with a small amount of liquid when blending liquid ingredients. Then gradually add more liquid
through the lid opening section.
• You can stabilise the product correctly if you place your hand on top of the locked blender.
• It may be useful to use the pulse mode when blending any solid or very thick food products, as this
will prevent the cutting blade from becoming clogged.
CLEANING AND CARE
• Warning! Never immerse any electrical parts of the product in water or in other liquids during
cleaning. Never place it under running water.
• When cleaning, never use petrol or solvents, and do not use any abrasive cleaners or cleaning aids.
• Always clean the jar after each operation, rst ll the jar half with warm water and operate at the pulse
setting for several times.
13
Set the switch to position “0”, unplug the power cable from the wall socket.
14
Clean the blender with a long-handled cleaning brush so that you do not injure yourself on the
cutting blade. Warning! The cutting blade is very sharp.
15
Clean the lid and blender jar under hot running water with a damp sponge and mild dishwashing
detergent. Dry all of the pieces completely before using again.
Note: Detachable parts are dishwasher safe.
16
Clean the product’s exterior surfaces with a slightly damp cloth and then dry them thoroughly.
Make sure that no water enters the product interior (for example, through the switch).
SPECIFICATION
Rated voltage : 220–240 V~, 50/60 Hz
Rated power input : 400 W
Continuous Operation time : 1 minute
Protection class : II
DISPOSAL
The crossed-out wheeled bin logo requires the separate collection of waste electric and
electronic equipment (WEEE). Electric and electronic equipment may contain dangerous and
hazardous substances. Do not dispose of this appliance as unsorted municipal waste. Return it
to a designated collection point for the recycling of WEEE. By doing so, you will help to conserve
resources and protect the environment. Contact your retailer or local authorities for more
information.
IM_OMX103_140919_V05_HR.indb 14 19/9/14 8:55 AM
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OMX 103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OMX 103 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info