783043
17
Zoom out
Zoom in
Previous page
1/110
Next page
17
EN
Adjustment of the door hinges
Note:
If necessary, or if the premises require it, the mounting of the door can be changed. To do this, follow
below instructions in the given order.
The following tools are required: Socket wrench or wrench 8 mm, phillips screwdriver, slotted
screwdriver. Due to the uniqueness of the appropriate tools, those are not mentioned separately in
the following instructions.
1. Remove the two plastic covers and put them aside.
2. Hold the door rmly, remove the two screws and pull the top hinge out of the door.
3. Remove the door from the lower hinge pin by gently pulling it upwards. Gently place it on a patted
surface, to avoid damaging it. Remove the lower hinge bracket on the right side of the unit and
remove the leveling foot on the left side. Reverse their positions.
Note: For detailed information see overview illustration .
Caution
After you have placed the refrigerator upright on its feet, wait for 6 hours before you connect it to the
mains to permit the cooling system to regain full performance.
4. Install the lower hinge on the left side of the refrigerator. Install the adjustable foot on the right side
of the refrigerator. Unscrew also the stopper piece at the bottom of the door, turn it and x it to the
opposite side.
5. Remove the hinge pin from the top hinge and screw it back into the hinge from the other side. Install
the door onto the lower hinge pin, now located on the left side of the appliance.
6. Install the upper hinge and hinge cover on the left side of the unit. Place the plastic cover on the hole
on the right side of the top of the refrigerator to cover the screw holes.
Note:
When installing the door, ensure that the top of the door is level with the top of the cabinet. If the door
is not level, the rubber gasket will not make a good seal with the cabinet which can cause the appliance
to malfunction.
INSTALLING THE DOOR HANDLE
7. Remove the two blind plugs at the desired side of the door.
8. Install the handle with screws provided.
9. Clip the two provided caps onto the screws.
IM_OFZ 411 E_OFZ 421 E_210303_V11_HR.indb 17IM_OFZ 411 E_OFZ 421 E_210303_V11_HR.indb 17 3/3/2021 2:37 PM3/3/2021 2:37 PM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OFZ 411 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OFZ 411 E in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 6.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info