783029

OK ODW 6011 A2 FS B Manual

22
Zoom out
Zoom in
Previous page
1/80
Next page
22
Size = A5
EN
OPERATION
Washing dishes
11 • Consider following steps to start the washing process:
1. Load the dishwasher basket.
2. Add detergent or rinse aid.
Important: Make sure the water-tap/water supply is open, the appliance is connected to the
mains and the door is closed correctly.
3. Push the switch to turn on the dishwasher.
4. Press P to choose your program, refer to chapter Choosing Program. If the dishwasher is
not completely loaded, then you can additionally select the half load mode. This mode
allows you to save both water and electricity when using the bottom and top basket of your
dishwasher. Press the button 1/2 and the half load indicator lights up.
Note:
• This mode can only be used with the program setting Intensive, ECO and 90 min.
• We recommend to use the half load function if the dishes are only slightly soiled.
5. For timer function (delay), please refer to chapter TIMER - DELAY WASHING. Push the
button.
• To stop the process push the button again.
Note: The program lights show the state of the dishwasher:
a) Program light on: standby or pause.
b) Program light blinking: washing process ongoing.
6. When the working cycle has nished, the buzzer of dishwasher will sound 8 seconds, then
stop.
- Turn o the appliance using the button and shut o the water supply.
- Open the door of the dishwasher.
Warning! It is dangerous to open the door when washing, because the hot water may scald
you.
- Wait a few minutes before unloading the dishwasher to avoid handling the dishes and
utensils while they are still hot and more susceptible to breakage. They will also dry better.
- Unload the dishwasher.
Change/ pause the washing cycle
• You can modify the washing program when the dishwasher just runs for a short time. Otherwise,
the detergent may have already been released, and the appliance may have already drained the
wash water.
- Press the button and then the Program selection button P for more than 3 seconds. The
machine will switch to standby mode.
- Change the program to the desired cycle setting.
- Press the button again to continue washing process.
Note: If you open the door during washing, the machine will pause. When you close the door, the
machine will continue working after 10 seconds.
• If you forgot a dish you can pause the process and add it, but make sure the detergent
compartment has not already opened.
1. Press button to pause the washing process.
2. After the spray arms have come to rest, you can open the door completely.
3. Add forgotten dishes.
4. Close the door and press the button again and the dishwasher will continue after 10
seconds.
IM_ODW6011 A2 FS B_190415_V04_HR.indb 22 15/4/2019 13:44
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK ODW 6011 A2 FS B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK ODW 6011 A2 FS B in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 10.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info