644317

OK ODW 60032 FS A2 Manual

24
Zoom out
Zoom in
Previous page
1/27
Next page
24
EN
Legal note:
* EN 50242: This program is the test cycle. The information for comparability test in accordance with
EN 50242, is as following:
- Capacity: 12 setting (ODW 60032 FS A2), 9 setting (ODW 45012 FS A2).
- Upper basket: top wheels on rail.
- Rinse aid setting: 6
- The power consumption of: o-mode is 0.45 W
left-on mode is 0.49 W
CLEANING AND CARE
• Warning! When cleaning, never use solvents or abrasive materials, hard brushes, metallic or sharp
objects. Solvents are harmful to human health and can attack plastic parts, while abrasive cleaning
mechanisms and tools may scratch the surface(s).
• Clean the exterior surfaces of the product with a slightly damp cloth and dry them well. Make sure
that no water enters the product interior (e.g. at the switches).
• Clean the edge around the door using a soft, warm and damp cloth only. To avoid penetration of
water into the door lock and electrical components, do not use a spray cleaner of any kind.
Cleaning the lter assembly
The lter prevents larger remnants of food or other objects from getting inside the pump. Inspect the
lters for blocking every time the dishwasher has been used.
13
The lter system consists of a coarse lter, a at (Main lter) and a micro lter (ne lter).
• Main lter A: Food and soil particles trapped by this lter are pulverized by a special jet on the
spray arm and washed down to drain.
• Fine lter B: This lter holds soil and food residue in the sump area and prevents it from being
deposited on the dishes during wash cycle.
• Coarse lter C: Larger items, such as pieces of bones or glass that could block the drain are
trapped in the coarse lter. To remove the items caught by the lter, gently squeeze the tap on
the top of this lter and lift out.
Disassemble and clean the lter according to following steps:
• Turn the lter cap (lter C) anticlockwise and take o whole lter assembly.
• Take out lters B and C.
• Take out lter C.
• Wash lters under running water.
• Reassembling is done in reverse order. Make sure the lter assembly is installed correctly.
Note: Do not use the dishwasher with lter system not installed.
Cleaning the spray arms
14
The spray arms can be easily removed for periodic cleaning of the nozzles, to prevent possible clogging.
• Grasp the middle of the spray arm, pull it upwards to remove it.
• Wash the arms under a jet of running water .
• Return them carefully to their seat and make sure that the spray arms are installed correctly and
can turn freely.
ERROR CODES
Code Meaning Possible causes
The
light ickers.
Longer inlet time
• Faucets is not opened
• Water intake is restricted
• Water pressure is too low
The
light ickers.
Overow
• Some component of dishwasher leaks
IM_ODW60032_160118_V04_HR.indb 24 18/1/16 2:00 PM
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK ODW 60032 FS A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK ODW 60032 FS A2 in the language / languages: English, German as an attachment in your email.

The manual is 8,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info