36
EN
The spray arms can be easily removed for periodic
cleaning of the nozzles, to prevent possible clogging.
Wash them under running water and carefully replace
them in their seats, checking that their rotary movement
is in no way impeded.
Grasp the middle of the spray arm, pull it upwards to
remove it. Wash the arms under a jet of running water
and return them carefully to their seat. After reassembly,
check that the spray arms turn freely. Otherwise, check
that they have been installed correctly.
CLEANING THE SPRAYARM
It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm jets and bearings.
INSTALLATION INSTRUCTION
The installation of the pipes and electrical equipment should be done by professionals.•
Danger of Electrical Shock Hazard! Disconnect electrical power before installing dishwasher. Failure to do so can •
result in death or electrical shock.
WARNING:
THE INSTALLATION POSITION OF DISHWASHER SHOULD BE NEAR THE EXISTING INLET AND DRAIN HOSES AND
POWER CORD. ONE SIDE OF THE CABINET SINK SHOULD BE CHOSEN TO FACILITATE THE CONNECTION OF
DRAIN HOSES OF THE DISHWASHER.
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the
adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can be positioned either
to the right or the left sides to facilitate proper installation.
POSITIONING THE APPLIANCE
ELECTRICAL REQUIREMENTS
Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply.
Use the required fuse 10 amp, time delay fuse or circuit breaker recommended and provide separate circuit serving
only this appliance.
ELECTRICAL CONNECTION
Ensure the voltage and frequency of the power being corresponds to those on the rating plate. Only insert the plug
into an electrical socket which is earthed properly. If the electrical socket to which the appliance must be connected is
not appropriate for the plug, replace the socket, rather than using a adaptors or the like as they could cause
overheating and burns.
GROUNDING INSTRUCTIONS
This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of electric
shock by providing a path of least resistance for the electric current. This appliance is equipped with a cord having an
equipment-earthing conductor and an earthing plug. The plug must be plugged into an appropriate outlet that is
installed and earthed in accordance with all local standards and requirements.
POWER CONNECTION
For personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.•
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE EARTHING CONNECTION FROM THE POWER •
CORD.
WARNING:
Improper connection of the equipment earthing conductor can result in the risk of an electric shock.•
Check with a qualified person or service representative if you are in doubt whether the appliance is properly •
earthed.
Do not modify the plug provided with the appliance. If the plug does not fit properly to the outlet, please have a •
qualified electrician to install a proper outlet.
WARNING:
