Manual OK ODL 49650UV-TIB (page 47 of 100) (English, German, Dutch)

783182

Zoom out

Zoom in

1/100

English - 46 -

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such as a

wall socket (220-240V AC, 50 Hz).

To switch on the TV from standby mode either:

• Press the Standby button, Programme +/- or a

numeric button on the remote control.

• Press the middle of the side function switch on the

TV in.

To Switch the TV Off

Press the Standby button on the remote control or

press the middle of the side function switch on the

TV in and hold it down for a few seconds, the TV will

switch into standby mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched into standby mode, the standby

LED can blink to indicate that features such as Standby

Search, Over Air Download or Timer is active. The LED can

also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK. In the following steps of

the installation guide, set your preferences using the

directional buttons and OK button.

On the second screen set your country preference.

Depending on the Country selection you may be asked

to set and confirm a PIN at this point. The selected PIN

cannot be 0000. You have to enter it if you are asked

to enter a PIN for any menu operation later.

You can activate Store Mode option in the next step.

This option will configure your TV’s settings for store

environment and depending on the TV model being

used, the supported features of it may be displayed on

the side of the screen as an info banner. This option

is intended only for store use. It is recommended to

select Home Mode for home use. This option will be

available in Settings>System>More menu and can

be turned off/on later. Make your selection and press

OK to continue.

Depending on the model of your TV and the country

selection Privacy Settings menu may appear at

this point. Using this menu you can set your privacy

privileges. Highlight a feature and use Left and

Right directional buttons to enable or disable. Read

the related explanations displayed on the screen

for each highlighted feature before making any

changes. You can use Programme +/- buttons to

scroll up and down to read the entire text. You will

be able to change your preferences at any time

later from the Settings>System>Privacy Settings

menu. If the Internet Connection option is disabled

Network/Internet Settings screen will be skipped

and not displayed. If you have any questions,

complaints or comments regarding this privacy

policy or its enforcement, please contact by email at

smarttvsecurity@vosshub.com.

Highlight Next and press OK button on the remote

control to continue and the Network/Internet Settings

menu will be displayed. Please refer to Connectivity

section to configure a wired or a wireless connection.

If you want your TV to consume less power in standby

mode, you can disable the Wake On option by setting it

as Off. After the settings are completed highlight Next

and press OK button to continue.

On next screen you can set broadcast types to be

searched, set your encrypted channel searching

and time zone (depending on the country selection)

preferences. Additionally you can set a broadcast

type as your favourite one. Priority will be given to the

selected broadcast type during the search process

and the channels of it will be listed on the top of the

channel list. When finished, highlight Next and press

OK to continue.

About Selecting Broadcast Type

To turn a search option for a broadcast type highlight

it and press OK. The checkbox next to the selected

option will be checked. To turn the search option off

clear the checkbox by pressing OK after moving the

focus on the desired broadcast type option.

Digital Aerial: If D. Aerial broadcast search option

is turned on, the TV will search for digital terrestrial

broadcasts after other initial settings are completed.

Digital Cable: If D. Cable broadcast search option

is turned on, the TV will search for digital cable

broadcasts after other initial settings are completed.

A message will be displayed before starting to search

asking if you want to perform cable network search. If

you select Yes and press OK you can select Network

or set values such as Frequency, Network ID and

Search Step on the next screen. If you select No

and press OK you can set Start Frequency, Stop

Frequency and Search Step on the next screen.

When finished, highlight Next and press OK button

to continue.

Note: Searching duration will change depending on the

selected Search Step.

Satellite: If Satellite broadcast search option is turned

on, the TV will search for digital satellite broadcasts

after other initial settings are completed. Before

satellite search is performed some settings should be

made. Antenna Type menu will be displayed first. You

can select Antenna Type as Direct, Single Satellite

Cable or DiSEqC switch by using Left or Right

buttons. After selecting your antenna type press OK to

see the options to proceed. Continue, Transponder

list and Configure LNB options will be available. You

can change the transponder and LNB settings using

the related menu options.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of OK ODL 49650UV-TIB in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3.59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

OK ODL 49650UV-TIB Manual

Product: