783173
42
Zoom out
Zoom in
Previous page
1/60
Next page
English - 41 -
the searching method on the next screen and press
Select to start search.
If the Satellite option is selected, you can choose an
operator on the next step, if available. You can also
choose to perform full or manual scan. Highlight the
operator option you prefer and press Select button
to proceed. Satellite Connection screen will be
displayed next. Depending on your previous selections
some options may be preset automatically. Change if
necessary and proceed.
If you select Manual or Full option, you will have to
select the satellite in the next step. Then Satellite
Connection screen will be displayed. Set the LNB
Type, LNB Power, DiSEqC setup, Single Cable
and Scan Mode options manually corresponding to
your environment on the next screen. If you select
Manual  Frequency,
Polarisation and Symbol Rate options additionally
before the scan starts.
When complete press the Play/Pause button. The
TV will start to search available broadcasts. While the
search continues you can press the Select button to

Highlight Yes and press Select to cancel.
When the initial setup is completed “Channel Scan
Complete” message will be displayed. You can choose
to make changes on the channel list or rescan on
this point. Highlight Done and press Select
the setup.
Home screen will be displayed. In order to switch
to Live TV mode and watch TV channels highlight a
channel from the On Now row on the Home screen or
from the Antenna Channels row on the Live screen
and press Select to start watching.
Main Screen
Fire TV television, your
TV must be connected to the Internet. Connect the
TV to a home network with a high-speed Internet
connection. You can connect your TV wirelessly or
wired to your modem/router. Refer to the Network
Menu and Connecting to the Internet sections for
further information on how to connect your TV to the
internet.
The main screen is the centre of your TV. Press
the Home button on your remote to display the
main screen. From the main screen you can start
any application, switch to a TV channel, watch a
movie or switch to a connected device, or manage
the settings. Depending on your TV setup and your
country selection in the initial setup the main screen
󰀨
The main screen is organized into several tabs. Home,
Live, Your Videos, Movies, TV Shows, Apps and
Settings tabs will be available. You can scroll through
them using the directional buttons. Available tabs may
󰀨
your TV and whether you signed in to your Amazon
account. Move the focus to the desired tab option to
display the content. Available options of the highlighted
tab will be positioned in rows generally. To navigate
through the options use the directional buttons on
the remote. Select a row then move the focus to the
desired item in the row. Press Select button to make
a selection or to enter a sub-menu.
The main screen will be opened with the Home tab. On
the upper side of the screen, search tool will be located
along with other tab options. You can choose either to
type a word to start a search via the virtual keyboard
or try voice search option (if your remote has a built-in
microphone). Press and hold the Voice button on your
remote (if available) and speak to perform a search.
Live TV
Live TV refers to channels that have been tuned in
via an aerial, cable and satellite connection. There
are several ways to watch Live TV channels. You can
highlight the Aerial or Satellite option from the Inputs
row on the Home screen and press Select to switch to
Live TV mode and watch TV channels. You can also
highlight a channel from the Recent or On Now row on
the Home screen and press Select to start watching.
Customising TV Settings
Adjusting the Picture Settings
Allows you to set your preferred picture settings. You
can access the picture settings menu via the Settings
menu on the main screen or by pressing and holding
the Home button for about 2 seconds while viewing
any input.
Accessing Picture Settings via Settings Menu
Press the Home button, scroll to Settings tab and
press the Select button. Scroll to Display & Sound
option and press the Select button. Scroll down to
Picture Settings option and press the Select button.
Scroll down to select the input that you want to adjust
the picture setting of and press Select button. The TV
will now change to the selected input. The Picture
Settings menu will appear on the right hand side of
the screen.
Accessing Picture Settings while watching the TV
While watching the input that you would like to adjust
press and hold the Home button for 2 seconds. The
quick settings menu will appear on the right hand side
of the screen. Scroll down and highlight Picture then
press Select. The picture setting options will appear
on the right hand side of the screen.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK ODL 43850 UV-TFB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK ODL 43850 UV-TFB in the language / languages: English, German as an attachment in your email.

The manual is 3.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info