783172
49
Zoom out
Zoom in
Previous page
1/219
Next page
EN
49
Getting Started
Cable Installation
Before the installation and use, please read carefully the relevant content in “Warning and Safety
instructions”.
Take out the TV from the wrapping package and put it in a drafty and at place.
NOTE:
The range of power input for the TV is 100-240V~ 50/60Hz; do not connect the TV power input
port with the power cable out of the above range.
Please hold the insulated part of the plug when you are unplugging the power cable, do not
touch directly the metallic part of the cable.
Before connecting to an external device, please rstly make sure that the TV set and the external
device have been turned o. When connecting, please make reference to the interface name and
the interface color to connect the signal cable.
The unit has a built-in wireless network card, and can directly receive network signals from
wireless router through WIFI antenna.
Using the Remote Control
When using the remote control, aim it at remote sensor on the television. If there is an object
between the remote control and the remote sensor on the unit, the unit may not operate.
Do not shake the remote control violently. Also, do not splash liquid on the remote control, also
do not put the remote control in high humidity place.
Do not place remote control under direct sunlight which might cause deformation of the unit
by heat.
When the remote sensor is under direct sunlight or strong lightning, the remote control might
not function properly. If so please change the lightning or TVs position, or operate the remote
control closer to the remote sensor.
The recommended eective distance for using the remote control is about 7 metres.
Installing Batteries in the Remote Control
1. Open the cover at the back of the remote control.
2. Install two AAA size batteries. Make sure to match the “+” and “-” ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK ODL 43850 UC-TIB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK ODL 43850 UC-TIB in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 15.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info