639850
45
Zoom out
Zoom in
Previous page
1/109
Next page
45
EN
TROUBLESHOOTING
Symptom Possible Causes and what you should do
No sound and picture • Check whether the main plug has been connected to a wall socket
• Check whether you have pressed the POWER button at the bottom of
the TV.
• Check the picture contrast and brightness settings.
Normal picture but no
sound
• Check the volume.
• Sound muted? Press the MUTE button.
• Try another channel, the problem may be with the broadcast.
• Are the audio cables installed properly?
The remote control does
not work
• Check to see if there any object between the product and remote
control Causing obstruction.
• Are batteries installed with correct polarity (+ to +,– to –)?
• Install new batteries.
Power is suddenly turned
o
• Is the sleep timer set?
• Check the power control settings. Power interrupted.
• No broadcast on station tuned with auto activated.
Picture appears slowly
after switching on
• This is normal, the image is muted during the product startup process.
Please contact your service center, if the picture has not appeared after
ve minutes.
No or poor color or poor
picture
• Adjust the Color in menu option.
• Keep a sucient distance between the product and the VCR.
• Try another channel, the problem may be with the broadcast.
• Are the VIDEO cables installed properly?
• Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or
picture shaking
• Check for local interference such as an electrical appliance or power
tool.
Poor reception on some
channels
• Station or cable product experiencing problems. Tune to another
station.
• Station signal is weak, reorient antenna to receive weaker signal.
• Check for sources of possible interference.
Lines or streaks in Pictures • Check the antenna (Change the direction of the antenna).
No output from one of the
speakers
• Adjust Balance in menu option.
The signal is out of range.
(PC mode)
• Adjust resolution, horizontal frequency, or vertical frequency.
• Check it whether the signal cable is connected or loose.
• Check the input source.
Vertical bar or stripe on
back ground & Horizontal
Noise & Incorrect position
(PC mode)
• Work the auto congure or adjust clock, phase, or H/V position.
Screen color is unstable or
single color.
• Check the signal cable.
• Reinstall the PC video card.
IM_ODL40450_A141030_V03_HR.indb 45 30/10/14 6:02 PM
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK ODL 40540-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK ODL 40540-B in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 7,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of OK ODL 40540-B

OK ODL 40540-B Quick start guide - Dutch - 3 pages

OK ODL 40540-B User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info