783150
46
Zoom out
Zoom in
Previous page
1/249
Next page
EN 46
Basic Operation
Turning on and o the TV
Turn on the TV
Plug the power cord into a suitable power point, then press the (symbol) Power button, under
the TV panel or on the remote control.
Turn o the TV
Press the button on the remote control to enter standby mode. To power down the
TV completely, unplug the power cord from the mains socket.
Do not leave your TV in standby mode for long periods of time. If you will not use the
TV for a long time, it is recommended to unplug the set from the mains and aerial.
NOTE:
If there is an accident power o, the TV will be in standby mode automatically after re-supply the
power. To ensure the normal use of the TV, the frequent turning on and o is forbidden, when
there is an accident power o, it is recommended to unplug the power cable from the power
socket.
First Time Setup
If this is the rst time you run the TV, the Initial Setup Menu will appear in the picture, and the items
of this menu also exist in other menus, so you are able to change the values after you set them up.
Tips: Make sure that the antenna connection is made.
Set your desired language
Press / buttons to select the language to be used for menus and message.
Select your country
Press the / buttons to select the country you are living in, and then press the ENTER button.
Select your time zone.
Press the / buttons to select a time zone, and then press the button.
Select your TV environment.
Press the / buttons to select the Home Mode or Store Mode and then press the button.
• Home is the recommended setting to produce the best energy eciency. If you want to set
Store Mode, a message appears asking you to conrm your choice.
Select the input source
Press the / buttons to select the input source and then press the button. (For more
detailed information, please refer to Channel menu Auto Tuning).
Auto Tuning
Press the button to start the auto searching.
First tuning DTV, press Menu and left arrow button to skip DTV tuning,
Second tuning ATV, press Menu and left arrow button to skip ATV tuning.
NOTE:
If the TV doesn’t receive any channels, please check your aerial connection or the country you
selected, and then try an auto search again.
If the TV just receives some of the channels, it means the aerial’s reception isn’t good enough and
an antenna service is recommended.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK ODL 32850HC-TB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK ODL 32850HC-TB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 41.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info