782919
13
Zoom out
Zoom in
Previous page
1/86
Next page
13 EN
INSTALLATION
Note:
Close the screw holes on the back of the Soundbar with the 8 supplied screws in order to avoid loss of
sound quality.
1 Place the soundbar and subwoofer with its rubber feet on a level and horizontal surface (for
example, under and in front of the TV). Both components must be placed near a socket outlet.
Alternatively, you can attach the soundbar to the wall using the wall mounts (for example above
and behind the TV). Please observe the following chapters.
WALL MOUNTING  PREPARATION
• The provided wall mount brackets can be used to x the soundbar to a wall. The wall mount brackets
are designed for use on vertical walls constructed of solid concrete or bricks.
• When installing on a hollow brick wall, verify rst that they have a minimum of 2.5 cm wall thickness
to be used for the wall plugs.
• If you are uncertain about the construction of your wall, please consult a qualied contractor or
installer for assistance.
• Additional tools (not included) are required for the installation.
• The screw heads must protrude so that the eyelets of the wall mounts will t.
• Use an electronic stud nder to check the wall type before drilling and mounting.
• During mounting, keep away children and pets.
• Make sure the soundbar is mounted in reach to the next wall outlet.
MOUNTING SOUNDBAR ON THE WALL
2 Drill 2 holes (Ø 3-8 mm each according to wall type) with correct distances. Insert wall plugs into
the drilled holes (use a hammer if necessary) and screw in the screws. Note that the screw heads
must protrude at least 3 mm out of the wall to securely t the suspension eyes of the wall mounts.
Screw the two hiking brackets to the back of the soundbar with the 8 supplied screws. Insert the
suspension eyes in the hiking brackets onto the screw heads.
Note: If the soundbar is xed to a wall and connected via HDMI cable, you will need an HDMI cable
with angled plug.
Plug the DC plugs of the power adapters into the DC (IN / 14V) inputs on the soundbar and
subwoofer. Plug the power supplies into the mains sockets.
USE THE CINCH, LINE IN, OPT OR HDMI SOCKETS
Important note: The soundbar's HDMI input can only be connected to TVs and other devices
that have a HDMI ARC (Audio Return Channel) terminal. When a standard HDMI input of a TV or
similar device is connected to the soundbar, sound can not be replayed.
3 Use the supplied cinch stereo cable, a HDMI cable, a TOSLINK cable (for OPT/Optical terminal) or an
audio cable with 3.5 mm jacks and connect the cinch L / R, HDMI, TOSLINK (OPT/Optical terminal)
or LINE OUT outputs of the TV to the cinch L / R, HDMI, TOSLINK (OPT/Optical terminal) or LINE IN
inputs of the soundbar.
REMOTE CONTROL  INSERTING/REPLACING BATTERY
4 Open the battery compartment. If necessary, remove the old batteries. Insert a new CR2025 battery.
Observe the correct polarity +/- as printed on the batteries and in the battery compartment.
Note: Before rst time use, remove the battery protection strip by pulling it out.
IM_OCS 200BT-B_200225_V04_HR.indb 13 25/2/20 10:51 am
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OCS 200BT-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OCS 200BT-B in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 8.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info