782917
23
Zoom out
Zoom in
Previous page
1/100
Next page
23 EN
5 Connecting a RCA to 3.5 mm audio cable:
One end to the TVs headphone socket.
The other end to the
AUX L / R sockets on the soundbar.
6 Connecting a RCA to RCA audio cable:
One end to the TVs audio output socket.
The other end to the
AUX L / R sockets on the soundbar.
REMOTE CONTROL – INSERTING/REPLACING BATTERY
7 Note:
For operation of the remote control, 1x 3 V lithium button cell (type CR2025) is needed (supplied).
To insert a battery, pull out the battery holder rst.
8 Insert the battery according to the polarity markings. The positive pole (marked with +) should be
facing up.
9 Push the battery holder fully back into the remote
control. Make sure it locks into place.
CAUTION!
Always insert a battery according to the polarity markings.
If the remote control does not work properly, replace the battery.
Use batteries of high quality only. Batteries of low quality might leak and cause damage.
Remove the battery, if the remote control is not to be used for a longer period of time, as it might be
damaged by leaking batteries.
The remote control may be less eective if:
- There are obstacles between the remote control and the infrared receiver.
- Other remote controls are operated at the same time.
- The battery is low.
BASIC FUNCTIONS
Make sure all the source connections are made properly.
Connect the power plug to a suitable electrical outlet. The display ashes --:--. The appliance is now in
standby.
Note:
Whenever possible, functions are described using the remote control. Some functions are also available
by using the controls on the soundbar.
SWITCHING APPLIANCE ON/OFF
Switching appliance on: Press / button on the soundbar or button on the remote control.
Switching appliance o: Press and hold / button on the soundbar, or press button on the
remote control. The appliance enters standby again.
Switching appliance o completely: Disconnect the power plug from the electrical outlet.
If the appliance is idle for about 15 minutes, it automatically switches to standby.
IM_OCS 100BT-B_V06.indb 23 1/3/2017 11:33
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OCS 100BT-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OCS 100BT-B in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 6.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info