783009

OK OAC 7020 Manual

41
Zoom out
Zoom in
Previous page
1/295
Next page
EN
41
Air exhaust
The exhaust hose and adaptor must be installed or removed in accordance with the
usage mode:
• COOL, AUTO mode: install exhaust hose.
• FAN, DEHUMIDFY mode: remove exhaust hose.
Wall (Parts: L, M, N, P)
Fig.  1 Screw the wall adapter and exhaust adapter onto each side of the
exhaust hose. Connect the exhaust adapter to the air exhaust of the
product, by sliding it into the bracket.
Fig.  2 Use the wall connector as pattern to mark the hole spacing on the
wall. Before drilling, make sure, that there aren’t any hidden objects
in the wall, e.g. gas or water pipes etc. Drill the holes with a suitable
power tool. Free the holes from dust and mount the wall connector
using supplied screws and plugs. Connect the wall adapter to the wall
connector.
Note:
• The exhaust hose can be expanded and compressed, but for optimal
performance, keep the exhaust length to a minimum.
• Do not extend the exhaust hose.
• Avoid over-bending.
• Observe the decommissioning instructions in the respective section,
if the product is not to be used for a longer period of time.
Window installation (Parts: L, M, O)
Fig.  3 The exhaust hose can be attached to an open or tilted window
alternatively. Screw the window outlet adapter onto the open end of
the exhaust hose.
Drainage hose
Fig.  4 The drainage hose is used to drain water from the upper drain outlet.
1. Slide the drainage hose as far as possible onto the outlet.
2. Lead the other end of the drainage hose into a suitable container or a
nearby drain.
Notes:
• Depending on the set modus the water is either drained directly or
collected in an internal tank. Drain the water respectively.
• Always cover the drain outlets when not in use.
• Observe the decommissioning instructions in the respective section, if
the product is not to be used for a longer period of time.
IM_OAC7020W_OAC7020B_200110_V06_HR.indb 41 10/1/2020 14:15
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OAC 7020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OAC 7020 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 16.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info