783004

OK OAC 2222 Manual

22
Zoom out
Zoom in
Previous page
1/92
Next page
22
EN
INSTALLATION
Placement
When choosing an installation place, consider following points:
• Observe all safety warnings!
• Ensure the minimum surrounding distance in every direction of 30 cm and 100 cm to other electrical
products.
• Keep a surrounding distance of minimum 50 cm around the outside of exhaust wall outlet and protect
it against entering objects and moisture.
• Make sure the wall behind the product is an exterior wall not a divider and the drill holes can be made
in a safe way, not obstructed by hidden objects in the wall.
• Ensure that a suitable power outlet is within reach at the desired location and remains accessible after
installation.
• Consider that during dehumidifying operation water is collected inside the product, which must be
continuously drained through a connected drainage hose into a suitable container or a nearby drain.
• Ensure that there are no obstacles obstructing the airow.
Air exhaust
The exhaust hose and adaptor must be installed or removed in accordance with the usage mode:
• COOL, AUTO mode: install exhaust hose.
• FAN, DEHUMIDFY mode: remove exhaust hose.
Wall (Parts: L, M, N, O)
Fig. 1 Screw the wall adapter and exhaust adapter onto each side of the exhaust hose. Connect
the exhaust adapter to the air exhaust of the product.
Fig. 2 Use the wall connector as pattern to mark the hole spacing on the wall. Drill the holes
with a suitable power tool. Free the holes from dust and mount the wall connector using
supplied screws and plugs. Connect the wall adapter to the wall connector.
Note:
• The exhaust hose can be expanded and compressed, but for optimal performance, keep
the exhaust length to a minimum.
• Do not extend the exhaust hose.
• Avoid over-bending.
• Observe the decommissioning instructions in the respective section, if the product is
not to be used for a longer period of time.
Window (Parts: L, M, P)
Fig. 3 The exhaust hose can be attached to an open or tilted window alternatively. Screw the
window outlet adapter onto the open end of the exhaust hose.
Note: Material necessary for attachment and sealing is not provided but must be
purchased in special shops.
Drainage hose
Fig. 4 The drainage hose is used to drain water from the upper drain outlet.
1. Slide the drainage hose as far as possible onto the outlet.
2. Lead the other end of the drainage hose into a suitable container or a nearby drain.
Notes:
• Depending on the set modus the water is either drained directly or collected in an internal
tank. Drain the water respectively.
• Always cover the drain outlets when not in use.
• Observe the decommissioning instructions in the respective section, if the product is not
to be used for a longer period of time.
IM_OAC2222_171127_V04_HR.indb 22 27/11/17 3:52 pm
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OAC 2222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OAC 2222 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info