738319
15
Zoom out
Zoom in
Previous page
1/32
Next page
12
Language Toggle
This setting allows users to touch a button on the Home screen and select the language of
their choice from the available language options. User selection of a different language
does not change the language for administrative or system screens; it changes only the
user view. The factory default setting is “OFF”. Set to “ON” to enable this feature and
show the Language button on the Home screen. (Available in some software versions.)
CROSS CiRCUIT
(excluding xR6000)
Select “OFF” to disable the CROSS CiRCUIT Pro programs (for use with the optional
CROSS CiRCUIT Pro Kit). Factory default is “ON”.
CROSS CiRCUIT
Attract Screen
(excluding Zero
Runner, xR6000)
When CROSS CiRCUIT is enabled, this setting allows you to change the Home screen
to a video highlighting the availability of CROSS CiRCUIT workouts. Set to “ON” if you
want to display this optional Home screen; factory default is “OFF”.
Default Stride
(XT-One, XT4700)
Set the default stride length of the unit to any value between 20” and 28” (51-71 cm) in
1/2” (1 cm) increments. The factory default setting is 24“ or 59 cm..
Default Incline
(XT-One only)
Set the default incline of the unit to any value between 1 (least incline) and 10
(steepest). For programs other than the preset Quick Start programs, the factory default
setting is 1.
Default Width
(LX8000 only)
Set the default lateral width of the unit to any value between 1 (narrowest) and 10
(widest). For programs other than the preset Quick Start programs, the factory default
setting is 1.
Stride Length
(XT3700 only)
The XT3700 features a mechanically adjustable stride linkage, either “JOGGING”
(shorter stride length) or “RUNNING” (longer stride length). The preferred length is
selected and set during installation, and the stride length in the console software must
be set to the same setting as the physical linkage. The factory setting is “RUNNING”;
if your machine is adjusted to Jogging stride at installation, this console setting
should also be set to “JOGGING”. You should not change it again unless the physical
configuration of the unit is also changed.
TV
Set to “ON” if you have a Personal Viewing System (PVS) accessory attached. The
factory default setting is “OFF”.
900 MHz
Set to “ON” if you have a 900 MHz audio accessory installed. The factory default
setting is “OFF”. (Available in some software versions.)
Touch Reset Machine Settings to restore original settings.
Use Import All Settings and Export All Settings to copy all the Club Settings to multiple units. Use Import
from USB and Export to USB for copying the settings on this screen only to multiple units. See “Setting Up
Multiple Units” for detailed instructions.
If you want to use custom TV or internet icons when setting up your TV or internet screens, insert a blank USB
device, and touch Format USB. This creates a directory structure into which you can place files containing icon
images that you may then select when setting up the internet or TV. Note: Only .jpg or .png file formats are
accepted, and icons that are not square will be truncated. For best results, icon should be at least 200
x 200 pixels.
Touch Save & Exit in the lower right corner to save your selections, or select another tab for more settings.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Octane Fitness ZR7000 - Smart Console at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Octane Fitness ZR7000 - Smart Console in the language / languages: English as an attachment in your email.

The manual is 8,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Octane Fitness ZR7000 - Smart Console

Octane Fitness ZR7000 - Smart Console Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info