738309
39
Zoom out
Zoom in
Previous page
1/48
Next page
31
Unit doesn’t power up
Check the connection of the power cord from the power supply to the wall
outlet and from the power supply to the machine.
Plug a lamp or radio into the wall outlet to verify that the outlet has power.
If a light switch controls the outlet, turn it on.
If you have verified power from the outlet, you may have a faulty power
supply. Contact your local dealer for service.
Console displays an “Err” code
An error code indicates a potentially faulty or improperly installed
component in your seated elliptical cross trainer. Contact your local dealer
for service.
Console blinks on / off
Check the power cord connections. Make sure the connections are secure
from the power supply into the machine base and the wall outlet.
Unplug and re-connect the console (you must remove the console back to
do this). When re-connecting the cable, make sure you feel the connector
snap into place or hear a click that indicates a proper connection.
If the issue persists, contact your local dealer for service.
LED lights are always on
Press and hold the Pause Clear button for five seconds to enter sleep
mode.
LED display is always toggling
Press the Enter button to stop the LED screen from toggling.
Console LEDs are not bright
enough
Enter User Set-up, by pressing and holding the Level / keys for three
seconds.
Press any / key until “BRIT” displays in the matrix window.
Press Enter until the LEDs are set at the desired brightness (1-8).
Press any / key until “EXIT” displays in the matrix window, then press
Enter.
If the brightness is set to “8” (the brightest level) and the LEDs are still
dim, contact your local dealer for service.
Console does not “beep” when
buttons are pressed
Enter User Set-up by pressing and holding the Level / keys for three
seconds.
Press any / key until “BEEP” displays in the matrix window.
Press Enter until “On” is displayed.
Press any / key until “EXIT” displays in the matrix window, then press
Enter.
If “BEEP” is set to “On” and the issue persists, contact your local dealer
for service.
Console is in pause mode and
won’t “wake up”
Machine may be in MOM mode; press and hold the Program /– keys for
three seconds to deactivate MOM mode.
Don’t feel a resistance change
Increase resistance level to 20 and pedal for 30 seconds. If you feel a
difference in the resistance, then the brake is working properly.
Are the cables connected correctly? Unplug and re-connect the console
cable (you must remove the console back to do this). When re-connecting
the cable, make sure you feel the connector snap into place or hear a click
that indicates a proper connection.
If the issue persists, contact your local dealer for service.
TROUBLESHOOTING & FAQs
Electronic Issues
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Octane Fitness xRide xR6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Octane Fitness xRide xR6 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Octane Fitness xRide xR6

Octane Fitness xRide xR6 Installation Guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info