Manual Oceanic XTC-100 (page 51 of 96) (English)

554376

Zoom out

Zoom in

1/96

XTC-100

The Pre Dive Planning Sequence will only scroll to the maximum depth al-

lowed by the nitrogen or oxygen limit, whichever is in control. The respective

bar graph will be displayed to indicate which is in control.

To access Time to Fly and Desaturate Countdowns:

• press the Advance (Upper) button 4 times (while in Surface Mode)

• The unit reverts to Surface Mode after 10 seconds, unless the Advance

(Upper) button is pressed to access the Log Mode.

The Time To Fly counter begins counting down 10 minutes after the last dive

has ended (after the 10 minute Transition Period) displaying the word 'FLY'

with a countdown (Fig. 49a) that starts at 23:50 (hr:min) and counts down to

0:00 (hr:min).

The Time to Desaturate counter (Fig. 49b), provides calculated time for tissue

desaturation at sea level. The countdown starts at 9:59 (hours:minutes) maxi-

mum and counts down to 0:00. If the time is calculated to be greater than

9:59, the display will indicate 9:- - (Fig. 50a) until it decreases to 9:59.

If a violation occurred during the dive, Time to Desaturate will not be dis-

played and a single dash ( - ) will appear instead of the letters FLY (Fig. 51) .

Fig. 49 - Time to Fly/Desaturate

Fig. 51 - After Violation

Fig. 50 - Desaturate (>9:59)

dash

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic XTC-100 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic XTC-100

Oceanic XTC-100 Additional guide - English - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oceanic XTC-100 Manual

Product: