Manual Oceanic Veo 100 (page 49 of 60) (English)

554368

Zoom out

Zoom in

1/60

Battery Hatch and Hatch Retaining Ring Installation

• Replace the Hatch O-ring with a new one which must be a

genuine Oceanic part that can be purchased from an Autho-

rized Oceanic Dealer. Use of any other O-ring will void the

warranty.

• Lightly lubricate the new Hatch O-ring with silicone grease

and place it on the inner rim of the Battery Hatch (Fig. 51).

Ensure that it is evenly seated.

• Slide the Hatch Retaining Ring, top portion first (small open-

ing), onto your thumb.

• Carefully place the Battery Hatch (with O-ring) into position

on the rim of the Battery Compartment, then press it evenly

and completely down into place with your same thumb.

• Maintain the Battery Hatch securely in place and, using your

other hand, slide the Retaining Ring down off your thumb and

into position around the Battery Compartment.

• The tabs on the Retaining Ring fit down into the two slots

located at the 2 and 8 o'clock positions.

• Using your fingers, turn the Ring counter clockwise 5 degrees

until the tabs engage (Fig. 52), then tighten it 5 more de-

grees by turning it counter clockwise with the aide of a small

blade screwdriver (Fig. 53).

• While tightening the Retaining Ring, exert continuous inward

pressure on it until it is secured in the proper position. A

small symbol located on the Ring should be aligned with the

Locked symbol located on the Housing (Fig. 53 a)

Fig. 51 -O-Ring Orientation

Fig. 53 -Retaining Ring

Tightened

Fig. 52 -Engaging Retaining

Ring

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic Veo 100 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oceanic Veo 100 Manual

Product: