551851
51
Zoom out
Zoom in
Previous page
1/62
Next page
51
OCS OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5272-r01 (9/28/11)
Set Reference Heading, information includes (Fig. 151) -
> Current Depth with FT (or M) icon, blank on surface.
> Reference Mode icon (2 bars with arrow) with graphic SET (flashing) above it.
> Static Arrow icon (at 12 o'clock), diver direction of travel.
> Dynamic Arrow, tracking Reference direction currently set.
> Numeric heading (diver's direction) at lower/right, with position graphic.
> On time remaining, counting down, if 15 to 0 (sec).
S (< 2 sec) - to flash Heading value (lower/right), with SET solid.
Rotate the Compass (keeping level) in either direction to new Heading, at lower/right.
S (< 2 sec) - to lock in new Heading, replacing SET.
Reverse Ref Heading, information includes (Fig. 152) -
> Current Depth with FT (or M) icon, blank on surface.
> Reverse Mode icon (2 bars with arrow) with reverse Heading (180° opposite of Reference Heading set) above it, flashing.
> Static Arrow icon (at 12 o'clock), diver direction of travel.
> Dynamic Arrow, tracking Reference direction currently set.
> Numeric heading (diver's direction) at lower/right, with position graphic.
> On time remaining, counting down, if 15 to 0 (sec).
S (< 2 sec) - to reverse Heading.
The value above the Reverse Mode icon (new course) will stop flashing indicating the Heading has been reversed.
The value at the lower/right will then indicate actual current direction.
CALIBRATION (surface only)
Local magnetic fields can effect display of actual location when reading a digital compass. It may be advantageous to Cali-
brate the Compass before its first use after purchase, use in new regions, or if inaccuracies are experienced. Calibration will be
required when the battery is changed.
CAL Access/Start**, information includes (Fig. 153) -
> Graphics CAL and ROTATE.
> 360 with ° icon.
• S (< 2 sec) - to activate (start) Calibration.
• Slowly and steadily rotate the unit 360° in either direction while maintaining it in a flat level position (keeping it level is
critical for acurracy), CAL progress will be displayed.
** The CAL ROTATE screen will also be accessed after the Battery is changed and Data is either saved or cleared.
CAL Progress**, information includes (Fig. 154) -
> Graphic CAL.
> dotted circle, increasing from 0 to 360° as it is rotated.
**Rotation should take about 30 seconds. If not fully rotated in 60 seconds, operation will revert to the Menu.
CAL Complete, information includes (Fig. 155, 156) -
> Graphic CAL.
> Graphic READY or AGAIN, flashing for 3 seconds.
* READY, means it passed, in which case Calibration is complete and operation reverts to the OP Main.
* AGAIN, means it failed**, in which case the CAL ROTATE screen will be displayed. Press S (< 2 sec) to repeat Calibration.
**If Calibration fails after 3 attempts, operation will revert to the Watch or Surface Main from which it was accessed. If you
then continue operation, the previous successful Calibration will remain in effect.
DECLINATION
Magnetic Declination is taken from numbers provided on maps or charts that apply to a specific location. The numbers represent
the easterly or westerly angular difference (Declination) in degrees between magnetic North and true (geometric or polar) North.
A Compass will point to magnetic North unless its reference is adjusted to true North prior to conducting activities.
Declination Menu, information includes (Fig. 157) -
> Graphic SEt, with selections -
> DECLIN OFF.
> DECLIN EAST.
> DECLIN WEST.
A (< 2 sec) - to step forward (down) through Menu selections.
M (< 2 sec) - to step back (up) through Menu selections.
S (< 2 sec), when the pointer icon ( > ) is next a selection - to select it.
Fig. 151 - SET REFERENCE
HEADING
(rotate to desired Heading)
Fig. 152 - REVERSE REF
HEADING
(reverse from 330°, to 150°)
Fig. 153 - START CAL
Fig. 154 - PROGRESS
(turn until full circle)
Fig. 155 - TO START CAL
Fig. 156 - CAL PASSED
Fig. 157 - DECLIN MENU
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic OCS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic OCS in the language / languages: English as an attachment in your email.

The manual is 9,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic OCS

Oceanic OCS Quick start guide - English - 2 pages

Oceanic OCS Quick start guide - German - 2 pages

Oceanic OCS User Manual - German - 62 pages

Oceanic OCS Quick start guide - French - 2 pages

Oceanic OCS User Manual - French - 62 pages

Oceanic OCS Quick start guide - Italian - 2 pages

Oceanic OCS User Manual - Italian - 62 pages

Oceanic OCS Quick start guide - Spanish - 2 pages

Oceanic OCS User Manual - Spanish - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info