551851

Oceanic OCS Manual

44
Zoom out
Zoom in
Previous page
1/62
Next page
44
OCS OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5272-r01 (9/28/11)
FREE MENU
M (< 2 sec) - to access Menu, while viewing Surface Main.
A (< 2 sec) - to step down (forward) through selections.
M (< 2 sec) - to step up (backward) through selections.
S (< 2 sec) - to access selection indicated by Arrow icon ( > ).
M (2 sec), any time while in the Menu system - to revert to Surface Main.
S (2 sec), while viewing the Menu - to revert to Surface Main.
2 min (no button action) - will revert to Surface Main.
CDT (Countdown Timer) STATUS, information includes (Fig. 127A) -
> Graphics CD TMR solid with OFF (or ON) flashing.
> Countdown Time (hr:min). If OFF, 0:00 or the CDT time if previously set. If ON, the remaining time (min:sec).
• A (< 2 sec) - to step through selections OFF, ON, and SET.
• S (< 2 sec) - to save the selection that is flashing.
• S (2 sec) - to revert to FREE Menu.
>> If OFF is selected, operation reverts to the Menu.
>> If ON (start) is selected, operation reverts to the Menu with the time set starting to countdown.
>> If SET is selected (Fig. 127B), Set CDT is accessed.
Set CDT, information includes (Fig. 128):
> Graphics SEt and CD TMR.
> CDT (min:sec) with Minutes digits flashing.
> Time (clock) icon.
• A (hold) - to scroll upward through Minute Set Points at a rate of 8 per second from 0: to 59: in increments of 1: (min).
• A (< 2 sec) - to step upward through Set Points one at a time.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the Minute Set Point and flash the Seconds digits.
• A (hold) - to scroll upward through Seconds Set Points at a rate of 8 per second from :00 to :59 in increments of :01 (sec).
• A (< 2 sec) - to step upward through Set Points one at a time
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the CDT Set Point and revert to the CDT Status screen with SET flashing (similar to Fig. 127B).
• S (2 sec) - to revert to FREE Menu.
The CDT will run in the background, while on the surface and during dives, until it counts down to 0:00, or it is turned OFF.
When a set Countdown Time reaches 0:00, the Audible Alarm will sound during which time the graphic CDT will be displayed
with 0:00 flashing on the Surface or Dive Main (Fig. 129).
EDT ALARM
Factory set for a fixed 30 seconds, the EDT (Elapsed Dive Time) alarm sounds the Audible every 30 seconds while underwater in
FREE Dive Mode.
Set EDT Alarm, information includes (Fig. 130):
> Graphic EDT.
> Graphic OFF (or ON) flashing.
• A (< 2 sec) - to toggle OFF/ON.
• S (< 2 sec) - to save Set Point and revert to FREE Menu.
• S (2 sec) - to revert to FREE Menu.
DD ALARMS
There are 3 Descending Depth (DD) alarms that can be set at progressively deeper depths. DD2 values deeper than DD1, DD3
values deeper than DD2.
Set DD1 Alarm, information includes (Fig. 131):
> Depth value with FT (or M) and MAX icons.
> Graphics DD1 AL.
> Graphic OFF (or ON) flashing.
• A (< 2 sec) - to toggle OFF/ON
• S (< 2 sec) - to save Set Point and flash Depth digits (if ON); or revert to FREE Menu (if OFF), bypassing DD2 and DD3.
• A (hold) - to scroll upward through Depth values at a rate of 8 per second from 30 to 330 FT (10 to 100 M) in increments of
10 FT (1 M)
• A (< 2 sec) - to step upward through Set Points one at a time.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the setting and revert to the FREE Menu.
• S (2 sec) - to revert to FREE Menu.
Fig. 127B - CDT STATUS
(to access Set, or set/ready)
Fig. 127A - CDT STATUS
(upon access)
Fig. 128 - SET CDT
(min:sec)
Fig. 129 - SURFACE MAIN
(during CDT alarm)
Fig. 130 - SET FREE EDT AL
Fig. 131 - SET FREE DD1 AL
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic OCS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic OCS in the language / languages: English as an attachment in your email.

The manual is 9,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic OCS

Oceanic OCS Quick start guide - English - 2 pages

Oceanic OCS Quick start guide - German - 2 pages

Oceanic OCS User Manual - German - 62 pages

Oceanic OCS Quick start guide - French - 2 pages

Oceanic OCS User Manual - French - 62 pages

Oceanic OCS Quick start guide - Italian - 2 pages

Oceanic OCS User Manual - Italian - 62 pages

Oceanic OCS Quick start guide - Spanish - 2 pages

Oceanic OCS User Manual - Spanish - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info