551847

Oceanic OCI Manual

55
Zoom out
Zoom in
Previous page
1/76
Next page
55
OCi OPERATING MANUAL
© 2002 Design, 2013 Doc. No. 12-5335-r02 (9/12/13)
DD ALARMS (FREE Mode only)
There are 3 Descending Depth alarms (DD1 - DD3) that can be set only at progressively deeper depths. DD2 values must be set
deeper than DD1 and DD3 values must be set deeper than DD2.
SET DD1 ALARM, information includes (Fig. 137):
> Depth with FT (or M) icon.
> Graphics DEPTH ALARM 1 and DD1.
> Graphics OFF, ON, and SET; last saved (OFF or ON) fl ashing upon access.
• A (< 2 sec) - to step forward (down) through the selections of OFF, ON, SET.
• M (< 2 sec) - to step back (up) through the selections.
• S (2 sec) - to step back to the Set Alarms Menu.
• S (< 2 sec) - to save the selection.
> If OFF or ON is saved, operation will revert to the Set Alarms Menu.
> If SET is saved, the Depth digits will fl ash.
• S (2 sec) - to step back to SET fl ashing.
• A (hold) - to scroll upward through the Depth set points 16/sec from 30 to 330 FT (3 to 100 M) in increments of 1 FT (1 M).
• A (< 2 sec) - to step upward through the Depth set points one at a time.
• M (< 2 sec) - to step back through the Depth set points one at a time.
• S (< 2 sec) - to save the setting and fl ash the graphic SET allowing ON or OFF to be selected/saved.
• M (2 sec), or 2 min of no button action, - to revert to the Surface Main.
SET DD2 & DD3 ALARMS, similar to Set DD1 Alarm.
> If DD2 is not set for a Depth that is deeper than DD1 and you attempt to turn DD2 ON, a message (Fig. 138) will be
displayed for 5 seconds and operation will revert to the FREE Set Alarms Menu. DD3 is similar.
-------------------------------------------------------
DA ALARMS (TECH FREE Mode only)
There are 6 Descending/Ascending Depth alarms (DA1 - DA6) that can be set without restrictions. They operate without restric-
tions during ascents as well as during descents. Each alarm sounds for the number of beeps set and sets of beeps set when the
depth set is reached during descents and/or ascents.
SET DA1 DEPTH ALARM, information includes (Fig. 139A):
> Depth with FT (or M) icon.
> Graphics DEPTH ALARM 1 and DA1.
> Graphics OFF, ON, and SET; last saved (OFF or ON) fl ashing upon access.
• A (< 2 sec) - to step forward (down) through the selections of OFF, ON, SET.
• M (< 2 sec) - to step back (up) through the selections.
• S (2 sec) - to step back to the Set Alarms Menu.
• S (< 2 sec) - to save the selection.
> If OFF or ON is selected, operation will revert to the Set Alarms Menu.
> If SET is selected, the Depth digits will fl ash.
• S (2 sec) - to step back to SET fl ashing.
• A (hold) - to scroll upward through the Depth set points 16/sec from 10 to 495 FT (3 to 150 M) in increments of 1 FT (1 M).
• A (< 2 sec) - to step upward through the Depth set points one at a time.
• M (< 2 sec) - to step back through the Depth set points one at a time.
• S (< 2 sec) - to save the setting and display the Set DA1 Audible screen.
• M (2 sec), or 2 min of no button action, - to revert to the Surface Main.
SET DA1 AUDIBLE ALARM, information includes (Fig. 139B):
> Depth set with FT (or M) icon.
> Graphic BEEPS - with the number of beeps (1 to 10), fl ashing upon access.
> Graphic TIMES - with the number of times the beeps are to repeat (1, 2, or 3).
> Graphics DA1 and Aud.
• S (2 sec) - to step back to the Set Depth screen with the Depth digits fl ashing.
• A (< 2 sec) - to step upward through the Beep set points from 1 to 10 one at a time.
• M (< 2 sec) - to step back through the Beep set points one at a time.
• S (< 2 sec) - to save the Beep setting and fl ash the Times digit.
• S (2 sec) - to step back to the Beep digits fl ashing.
• A (< 2 sec) - to step upward through the Times set points from 1 to 3 one at a time.
• M (< 2 sec) - to step back through the Times set points one at a time.
• S (< 2 sec) - to save the Audible Beep/Times setting and revert to the Set Depth Alarm screen with the graphic SET fl ashing
allowing ON or OFF to be selected/saved.
• M (2 sec), or 2 min of no button action, - to revert to the Surface Main.
SET DA2 to DA6 ALARMS, similar to Set DA1 Depth and Audible Alarm.
Fig. 137 - SET DD ALARM
Fig. 138 - SET DD MESSAGE
Fig. 139A - SET DA DEPTH
Fig. 139B - SET DA AUDIBLE
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic OCI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic OCI in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic OCI

Oceanic OCI User Manual - German - 76 pages

Oceanic OCI User Manual - French - 76 pages

Oceanic OCI User Manual - Italian - 76 pages

Oceanic OCI User Manual - Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info