551838

Oceanic OC1 Manual

13
Zoom out
Zoom in
Previous page
1/68
Next page
13
OC1 OPERATING MANUAL
© 2002 Design, 2009 Doc. No. 12-2761-r04 (9/6/11)
Set CDT, information includes (Fig. 13):
> Graphics SEt and CD TMR
> CDT (hr:min) with Hour digits flashing
> Time (clock) icon
• A (hold) to scroll upward through Hour Set Points at a rate of 8 per second from 0: to 23: in increments of 1: (hr).
• A (< 2 sec) to step upward through Set Points one at a time.
• M (< 2 sec) to step back through Set Points one at a time.
• S (< 2 sec) to save the Hour Set Point and flash the Minute digits.
• A (hold) to scroll upward through Minute Set Points at a rate of 8 per second from :00 to :59 in increments of :01 (min).
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time.
• S (< 2 sec) to save the CDT Set Point and revert to the CDT Status screen with SET flashing (similar to Fig. 12).
The CDT will run in the background, while in Watch mode, until it counts down to 0:00, or it is set OFF, or DC Mode is accessed
or a Dive is started in which case the CD will terminate and revert to OFF.
When a set Countdown Time reaches 0:00, the Audible Alarm will sound during which time the graphic CDT will be displayed
on the watch Default Time screen with 0:00 flashing (Fig. 14).
FREE Dive Mode has a separate (min:sec) CDT.
CHRONOGRAPH (Stop Watch/Lap Timer)
Upon access from the Menu, the Status screen is displayed
> OFF solid and 0:00, if no time was previously set
> ON and the remaining Countdown Time (hr:min), if running
> OFF flashing and the time previously set, if it has ended
Chrono Status, information includes (Fig. 15):
> Graphic CHRONO
> Elapsed time if running, or 0:00:00.00 (hr:min:sec .01 sec)
> Time (clock) icon
• S (< 2 sec) to start Timer counting up from 0:00:00.00 to 9:59:59.99 max (hr:min:sec .01 sec) in increments of .01
(1/100th sec). After first 4.99 seconds, the .01 digits display 2 dashes (. - - ).
• S (< 2 sec) to freeze and display Laps (up to 9), the Timer continues to run in the background
• A (< 2 sec) to stop Timer and recall Lap 1 (Fig. 16), repeat to recall other Laps
• A (2 sec) to reset Timer to 0:00:00.00 and revert to the Chrono Status screen
While the Chronograph is running, it remains on the screen until another screen is accessed, it will then continue to run in the
background while on the surface. Upon descending on a dive, Chrono operation will be terminated and reset to 0:00:00.00.
DAILY ALARM
When set On, the Daily Alarm will -
> be synchronized with the Watch Default Time selected.
> sound the Audible at the Time set every day.
> not sound the Audible while operating in DC Modes.
> run in the background until set Off.
Daily Alarm Status
Upon access, the following is displayed (Fig. 17) -
> Graphics DAILY AL solid with OFF (or ON) flashing.
> Alarm Time (hr:min) set with graphic A (or P) if 12 Hour Format, and Time (clock) and Alarm (speaker) icons.
• A < 2 sec to step through selections OFF, ON, and SET.
• S < 2 sec to save the selection that is flashing.
>> If OFF is selected, operation reverts to the Menu.
>> If ON is selected, operation reverts to the Menu with the Alarm enabled.
>> If SET is selected (Fig. 18), Set Daily Alarm is accessed.
Set Daily Alarm, information includes (Fig. 19):
> Graphics SEt and DAILY AL
> Alarm Time (hr:min) with Hour digits flashing
> Time (clock) and Alarm (speaker) icons
• A (hold) to scroll upward through Hour Set Points at a rate of 8 per second from 0: to 23: in increments of 1: (hr).
• A (< 2 sec) to step upward through Set Points one at a time.
• M (< 2 sec) to step back through Set Points one at a time.
• S (< 2 sec) to save the Hour Set Point and flash the Minute digits.
• A (hold) to scroll upward through Minute Set Points at a rate of 8 per second from :00 to :59 in increments of :01 (min).
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time.
• S (< 2 sec) to save the Set Point and revert to the Daily Alarm Status screen with SET flashing (similar to Fig. 18).
Fig. 13 - SET CDT
Fig. 14 - WATCH MAIN
(during CDT Alarm)
Fig. 15 - CHRONO
(started, running)
Fig. 16 - CHRONO
(started, frozen or recalled)
Fig. 17 - DAILY ALARM
STATUS (upon access)
Fig. 19 - SET ALARM TIME
Fig. 18 - DAILY AL STATUS
(to access Set or set/ready)
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic OC1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic OC1 in the language / languages: English as an attachment in your email.

The manual is 8,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic OC1

Oceanic OC1 User Manual - English - 180 pages

Oceanic OC1 Additional guide - German - 2 pages

Oceanic OC1 Quick start guide - German - 2 pages

Oceanic OC1 User Manual - German - 68 pages

Oceanic OC1 Additional guide - French - 2 pages

Oceanic OC1 Quick start guide - French - 2 pages

Oceanic OC1 User Manual - French - 68 pages

Oceanic OC1 Additional guide - Italian - 2 pages

Oceanic OC1 User Manual - Italian - 68 pages

Oceanic OC1 User Manual - Turkish - 180 pages

Oceanic OC1 User Manual - Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info