Manual Oceanic Data Plus (page 38 of 106) (English)

554362

Zoom out

Zoom in

1/106

was a nitrox dive).

If you descend during that first 10 minute transition period, time underwater

will be considered a continuation of that dive. The time at the surface (if less

than 10 minutes) will not be added as elapsed dive time. During the 10 minute

transition period, the Log Mode is accessible and will display that dive's data,

however, data will not be stored in the unit's memory until the 10 minute period

is completed. The PDPS will not appear until after the first 10 minutes.

Once 10 minutes have elapsed, the Surface Mode icon stops flashing (Fig. 34),

and the dive number will advance to show the number of the next dive. The

Surface Sequence will advance screens from Surface Mode., to Time to Fly, to

FO2, to PO2, to PDPS, and repeat once per minute until the next dive is made,

or until the unit enters Fly Mode after 12 hours. Also, that dive is entered into

the memory of the Dive Log, and a subsequent descent will be considered a new

dive. If the TLBG is displayed during the PDPS, limits are being controlled by

nitrogen. If the O2 bar graph is displayed, limits are being controlled by oxygen.

Remember!! FO2 must be set prior to descending on each nitrox dive.

DATA

PLUS

Fig. 34 - Surface Mode

(after dive >10 min SI)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic Data Plus in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oceanic Data Plus Manual

Product: