554362
16
Zoom out
Zoom in
Previous page
1/106
Next page
®
6
PROGRAMMING NITROX MIXES
WARNING: FO2 must be set 'before each' nitrox dive.
The DataPlus can be used either as an Air computer or a Nitrox computer. To
program the percentage O2, press and hold the control button when 'FO2' - 'Air'
appears during the Surface Sequence. The percentage O2 will advance 1% per
second from 21 to 50 (%) and display 'Air', then repeat until you release the
button.
If you are using Air as your breathing gas, set FO2 for 'Air', or leave it set for
'Air' after activation. When set with an FO2 value of 'Air', the DataPlus will
perform calculations the same as if FO2 were set for 21% O2, internally account-
ing for oxygen loading for any subsequent Nitrox dives. Oxygen related displays,
warnings, and the O2 bar graph will not appear on the LCD display for that dive
(Fig. 5), or subsequent dives, unless FO2 is set for a numerical value (21 to 50).
You can program the DataPlus for enriched nitrogen-oxygen (nitrox) mixtures of
21% to 50% oxygen (O2) before each nitrox dive. If FO2 is set at a value of 21%,
the unit will remain set as a '21% Nitrox computer' for subsequent nitrox dives
until FO2 is set to a higher value. Once FO2 is set to a value 'greater than' 21%
for a nitrox dive, the FO2 value displayed during the post dive Surface Sequence
that appears 10 minutes after that dive will be 50 (Fig. 6).
FT
O2
FT
MAX
G
LO
DATA
PLUS
Fig. 5 - No Decompression
Dive Mode (Air)
Fig. 6 - FO2 = 50%
O2
DATA
PLUS
G
LO
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic Data Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic Data Plus in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info