554363
72
Zoom out
Zoom in
Previous page
1/90
Next page
64
®
Console - bend the rubber console boot back to expose the edge of the module.
If the boot is flexible enough to permit, you may bend it back far enough to
scoop the module out with your index finger. Otherwise, it may be necessary
to insert a blunt screwdriver until the tip rests just underneath the module.
DO NOT pry the module from the console! Slowly increase the pressure under
the module by releasing the tension on the rubber boot. The module will slide
up the screwdriver and exit the console.
BATTERY REMOVAL
The battery compartment should only be opened in a dry and clean environ-
ment, with extreme care taken to prevent the entrance of moisture or dust.
Examine the case back to find the Battery Hatch (Fig. 70a):
• Remove the three screws that secure the battery hatch to the housing by
turning counter clockwise with a small philips head screwdriver.
• Lift the hatch up and out of the housing.
• Lift the battery, positive (+) end first, out of the battery compartment.
• Remove the battery hatch o-ring and inspect it for any signs of deteriora-
tion or deformity. DO NOT use tools to remove the o-ring.
• O-ring replacement is highly recommended to ensure proper sealing.
• Check the battery hatch and housing sealing surfaces for any signs of
damage which might impair proper sealing, and the inside of the battery
compartment for any signs of corrosion indicating entrance of moisture.
Fig. 70 - Case Back
a
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic Data Plus 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic Data Plus 2 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info