Manual Oceanic Data 100 (page 51 of 92) (English)

554358

Zoom out

Zoom in

1/92

DATA100

DATA

100

ceiling toward the surface as the TLBG recedes toward the Caution zone.

Upon reaching zero Total Ascent Time remaining, you should continue

decompressing until the TLBG segments are well inside of the green No

Decompression zone, to the left of the 12 o'clock position.

2. Your necessary decompression requires a ceiling depth between

60 and 70 feet (18 and 21 meters).

The display will be the same as the Decompression Mode with all segments of

the TLBG flashing (Fig. 40). Total Ascent Time needed to get back to the

surface will still be displayed numerically in the Main Time display.

To get back to the surface, you must safely ascend to just deeper than 60 feet

(18 meters) staying as close to 60 feet (18 meters) as possible. After waiting

until the TLBG recedes to the 50 FT/ 15 M zone, you can ascend to, but no

shallower than 50 feet (15 meters) and continue decompressing. As the TLBG

recedes into the 40 FT/ 12 M, 30 FT/ 9 M, 20 FT/ 6 M and then 10 FT/ 3 M

zones, you can ascend to, but no shallower than the zone indicated.

After Total Ascent Time reaches zero and the TLBG recedes into the yellow

Caution zone, you can surface. However, to add a greater margin of

protection, Oceanic strongly recommends that you wait until the

segments are well within the 'green' No Decompression zone, unless a

low air condition requires you to surface.

Fig. 40 - Delayed Violation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic Data 100 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oceanic Data 100 Manual

Product: