550354

Oceanic BUD Manual

13
Zoom out
Zoom in
Previous page
1/24
Next page
13
BUD OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5259-r01 (7/21/11)
NO DECO MAIN, information includes (Fig. 22) -
> DTR (hr:min) with NDC (or O2) icon.
> Current Depth with FT (or M) icon.
> Max Depth with MAX and FT (or M) icons
> EDT (Elapsed Dive Time) with DIVE and min icons
> NX, CF, DSAT (or Z+), icons - those that apply.
> TLBG.
> VARI, while ascending.
• B (< 2 sec) to access ALTs.
Upon ascending to 2 FT (0.6 M) during a dive, Surface Interval time will be displayed with the SURF icon flashing for the first 10
minutes with Current Depth displayed as 0 (Fig. 23).
• B (< 2 sec) to access Dive ALTs.
If a descent is made to 5 FT (1.5 M) for 5 seconds during that first 10 minutes, the dive will be continued. Surface time will not be added to
Elapsed Dive Time.
After 10 minutes elapse on the surface, operation will revert to the Surface Main with full access given to the other surface items.
NO DECO ALT 1, information includes (Fig. 24) -
> EDT (hr:min) with EDT icon.
> Max Depth with FT (or M) and MAX icons.
• B (< 2 sec) to access ALT 2 if NX, or revert to Main if Air.
• Revert to Main in 5 sec, if B not pressed.
NO DECO ALT 2 (if Nitrox), information includes (Fig. 25) -
> O2 saturation (accumulation) with O2% icon.
> Current PO2 value (ATA) with PO2 icon.
> FO2 Set Point with FO2 and NX icons.
• 5 sec or B (< 2 sec) to revert to Main.
SAFETY STOP MAIN, information includes (Fig. 26) -
> Stop Time (min:sec) with STOP icon, counting down.
> Current Depth with FT (or M) icon.
> Stop Depth with STOP and FT (or M) icons.
> NX, CF, DSAT (or Z+), icons - those that apply.
> TLBG.
• B (< 2 sec) to access ALTs**.
** The SS features up to 3 ALT displays which are similar to the No Deco Main, ALT1, and ALT2 displays, respectively.
DECOMPRESSION
Decompression mode activates when theoretical No Decompression time and depth limits are exceeded.
Upon entry into Deco, the full TLBG will flash (Fig. 27) for 10 seconds. The Stop Depth digits will flash while 10 FT (3 M) below
the required Stop Depth.
> Once within 10 FT (3 M) below the required Stop Depth (stop zone), the Stop Depth digits will stop flashing.
To fulfill your decompression obligation, you should make a safe controlled Ascent to a depth slightly deeper than, or equal to,
the required Stop Depth indicated and decompress for the Stop Time indicated.
The amount of decompression credit time that you receive is dependent on Depth, with slightly less credit given the deeper you
are below the Stop Depth indicated.
You should stay slightly deeper than the required Stop Depth indicated until the next shallower Stop Depth appears. Then, you
can slowly ascend to, but not shallower than that indicated Stop Depth.
Fig. 22 - NO DECO MAIN
Fig. 23 - NO DECO MAIN
(on surface < 10 min)
Fig. 24 - NO DECO ALT 1
Fig. 25 - NO DECO ALT 2
Fig. 26 - SS MAIN
Fig. 27 - DECO ENTRY
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic BUD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic BUD in the language / languages: English as an attachment in your email.

The manual is 5,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic BUD

Oceanic BUD Quick start guide - English - 2 pages

Oceanic BUD Quick start guide - German - 2 pages

Oceanic BUD User Manual - German - 24 pages

Oceanic BUD Quick start guide - French - 2 pages

Oceanic BUD User Manual - French - 24 pages

Oceanic BUD User Manual - Italian - 24 pages

Oceanic BUD User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info