Manual Oceanic Atom 1.0 (page 40 of 152) (English)

554357

Zoom out

Zoom in

1/152

DIVE COMPUTER (DC) SURFACE MODE

Pressing and releasing the M button momentarily 5 times (< 2

seconds each time) while the Watch Local Default Time screen

(Main Time or Alternate Time, whichever was selected as the

Default) is displayed accesses the DIVE COMPUTER (DC) SUR-

FACE MODE.

Once accessed by preesing the M button, DC SURFACE MODE

(Fig. 33) will remain on display for 2 hours during which time the

ATOM will enter Dive Mode upon descent below 4 feet (1.2

meters).

• During the 2 hour period, if the M button is pressed to access

other screens in the Watch Mode sequence, DC Surface

Mode must again be accessed prior to the first dive of a

series (if the WET ACTIVATION is set OFF).

• When WET ACTIVATION is set ON, the Wet Contacts will

activate Dive Mode regardless of what Mode the ATOM is

operating in at the time of the descent.

The ATOM will enter POST DIVE SURFACE MODE (Fig. 34)

following a dive upon ascent shallower than 4 feet (1.2 meters).

The Surface Interval time symbol SURFACE will flash during the

first 10 minutes after a dive.

Fig. 33 - Surface Mode

(Pre Dive)

Fig. 34 - Surface Mode

(Post Dive)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic Atom 1.0 in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oceanic Atom 1.0 Manual

Product: