550337
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
BC INFLATION USING THE POWER INFLATOR
With your Regulator connected to an appropriate cylinder, slowly open the cylinder valve to pressurize the
Regulator/Inflator system. Press the Power Inflator Button, located on the left side of the AIR XS II Mouth-
piece, until you hear air flowing into the BC. Minor compressions of the Power Inflator Button will initiate
airflow into the BC and allow small adjustments in buoyancy.
WARNING: If you depress the Power Inflator Button fully, the BC will inflate
rapidly. Be careful not to overinflate the BC during a dive causing an unwanted
rapid rise toward the surface.
Test the Power Inflator and Overpressure Relief Valve (OPV) prior to each dive to ensure they are function-
ing properly. Depress the Power Inflator until the BC fills completely, forcing the OPV in the upper (shoul-
der) unit to open. You will hear the sound of air venting from OPV, indicating that it is working properly.
While the BC is still inflated, listen for any undesired air leakage around the AIR XS II. The BC should stay
inflated until you deflate it manually.
BC DEFLATION USING THE RAPID EXHAUST VALVE (REV)
The Rapid Exhaust Valve (REV) is located inside the upper (shoulder) unit of the Inflator Assembly. It is con-
nected to the lower (power) unit by two Cables located inside the Corrugated Hose and coupled together
inside the Pull Connector.
The REV is operated by grasping the Pull Connector, or the lower (power) unit and pulling it down (away)
from the upper (shoulder) unit. The Cables pull the Exhaust Valve open, venting air from the BC through
the Vents of the upper unit of the Inflator Assembly.
The amount of air vented depends on how far open the Exhaust Valve is, the distance you
pull the inner Cable, and how long the Exhaust Valve is open. Short tugs vent small amounts
of air for minor changes in buoyancy, and a long pull will vent the entire BC in a matter of
seconds.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic Air XS 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic Air XS 2 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info