47262

Oce User Manual Print Satus Notifier Manual

44
Zoom out
Zoom in
Previous page
1/46
Next page
Troubleshooting
4
Print Status Notifier 4-1
4 Troubleshooting
This chapter describes the possible problems that may occur when
operating Print Status Notifier and the remedies to solve the problem.
Symptoms Probable cause Remedy
The job informa-
tion is not noti-
fied.
The device that you want to check
the job information of has not
been specified to be monitored.
Add the device that you want to check
the job information of to the device list.
% Refer to “Registering devices to be
monitored” on page 3-11.
Print Status Notifier has not been
started.
Start Print Status Notifier.
% Refer to “Starting and quiting Print
Status Notifier” on page 3-1.
The printer to be
monitored does
not appear in the
Monitored Device
Registration Wiz-
ard.
The printer driver that supports
Print Status Notifier has not been
installed.
Install a printer driver that supports
Print Status Notifier.
A port other than a TCP/IP port is
specified for the port setting for
the printer to be monitored.
Change the port setting for the printer
to a TCP/IP port. For details on the port
setting, consult the device administra-
tor.
An error for con-
necting to the de-
vice is displayed.
The computer or the device is not
connected to the network.
Connect the computer or the device to
the network.
The IP address or host name of
the device that you want to check
the job information of is specified
incorrectly.
Check that the IP address or host
name of the device that you want to
check the job information of has not
been specified incorrectly.
% Refer to“Page of registered device
details” on page 3-9.
SNMP Ver1 or OpenAPI for the
device is not enabled.
Contact the administrator of the de-
vice.
The device is not supported. Check whether or not the device to be
monitored is supported.
Print Status Noti-
fier was quit while
a job was being
monitored.
If Print Status Notifier is quit while a job is being monitored, the monitored
job that was terminated is automatically resumed when Print Status Notifier
is restarted.
… 44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce User Manual Print Satus Notifier at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce User Manual Print Satus Notifier in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info