47230
20
Zoom out
Zoom in
Previous page
1/98
Next page
20 Chapter 2 Basics
Remove/replace staple cartridge
4 If the staple cartridge is empty,
discard it and replace it with a
new one. Before replacing the
cartridge, pull at least 20 mm of
the staples out and tear off at the
staple tear line (3) which is
marked on the cartridge. If
there has been a misfeed, and
the cartridge still contains sta-
ples, pull 20 mm of staples out
of the cartridge and tear off at
the stapler tear line. Check that
the first staple is flat. If not, tear
off another 20 mm, using less
force.
[17]
5 Insert the cartridge into the sta-
pler head with the staples fac-
ing towards the head
mechanism. The cartridge
should be placed flat on the
slide on the bottom of the sta-
pler head and pushed firmly
into the stapler head.
[18]
6 Hold the staple cartridge firmly
in place and push down the car-
tridge locking lever.
[19]
Note: If the cartridge is allowed to move away from the stapler head
before the locking lever is in engaged, remove cartridge and tear off 20
mm of staples along the staple tear line.
Step Action Description
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce User Manual BLM200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce User Manual BLM200 in the language / languages: Dutch as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info