Manual Oce PP18C Advanced Operation Guide (page 16 of 150) (English)

49097

Zoom out

Zoom in

1/150

Handling Paper

1-10 ADVANCED OPERATION GUIDE

Envelopes

Envelopes should be fed in the face-up

position, right edge first.

Since the composition of an envelope is

more complex than that of ordinary

paper, it is not always possible to ensure

consistent printing quality over the entire

envelope surface.

Normally, envelopes have a diagonal

grain direction. See Paper Grain on

page 1-6. This direction can easily

cause wrinkles and creases when

envelopes pass through the printer. Before purchasing envelopes, make a

test print to check whether the printer accepts the envelope.

• Do not use envelopes that have an encapsulated liquid adhesive.

• Avoid a long printing session for envelopes only. Extended envelope

printing can cause premature printer wear.

• If jams occur, try setting a lesser number of envelopes on the MP tray.

• To avoid jams caused by curled envelopes, stack no more than 10

printed envelopes on the output tray.

Thick Paper

Fan the stack of paper and align the edges before loading them in the MP

tray. Some types of paper have rough edges on the back (those are

created when the paper is cut). In this case, put the paper on a flat place

and rub the edges once or twice with, for example, a ruler to smooth them.

Feeding rough edged paper may cause paper jams.

NOTE: If the paper jams even

after you smooth it out, load the

paper in the MP Tray with the

leading edge raised up a few

millimeters as shown in the

illustration.

Colored Paper

Colored paper should satisfy the same conditions as white bond paper,

refer to Paper Specifications, on page 1-2. In addition, the pigments used

in the paper must be able to withstand the heat of fusing during the printing

process (up to 200°C or 392°F).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oce PP18C Advanced Operation Guide in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oce PP18C Advanced Operation Guide Manual

Product: