47593
14
Zoom out
Zoom in
Previous page
1/20
Next page
2. Pull out the stitcher unit.
[Printer]
When a message of replenishing saddle
stitcher stapler Add staples is displayed
on the operation panel, follow the procedure
below.
1. Open the front cover
How to replenish saddle stitcher stapler
[Copier]
If a message appears on the copier indicat-
ing that staples have run out, follow the pro-
cedure below.
3. Turn the knob clockwise until the staple
holder section reaches the front-most
position.
4. Remove the staple holder by lifting
slightly and pull out the cartridge while
pressing the right and left buttons on the
staple holder.
5. Depress the right and left PUSH marks
to release the staple retainer.
6. Remove the empty staple case from the
staple holder.
8. Peel the tape securing the staples to the
staple case by pulling it.
7. Install a new staple case into the staple
holder.
Note:
Do not try to install staples more than a one
staple case
.
Alw
a
ys use a specified staple
staple case.
9. Depress the staple retainer until it is
locked.
10. Reinstall the staple holder and press it
until it is locked.
11. Push back the stitcher unit and close the
front cover.
Note:
The staples are free fed several times auto-
matically after closing the front cover.
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce Operations Guide Booklet Finisher at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce Operations Guide Booklet Finisher in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info