47593
5
Zoom out
Zoom in
Previous page
1/20
Next page
Cautions when using the product
WARNING
DO NOT place metallic objects or containers with water
(flower vases, flower pots, cups, etc.) on or near the
product. This type of situation presents a danger of fire
or electrical shock should they fall inside. ...................
DO NOT damage, break or attempt to repair any of the
signal line. DO NOT place heavy objects on the signal
line, pull it, bend it unnecessarily or cause any other
type of damage. These types of situations present a
danger of fire or electrical shock. ................................
NEVER attempt to repair or disassemble the product or
its parts as there is a danger of injury, fire or electrical
shock. .........................................................................
If the product becomes excessively hot, smoke ap-
pears, there is an odd smell, or any other abnormal
situation occurs, there is a danger of fire or electrical
shock. Turn the main switch to the printer or copier
OFF () immediately, remove the power plug of the
printer or copier from the outlet and contact your ser-
vice representative. ....................................................
If anything harmful (paper clips, water, other fluids, etc.)
falls into the product, turn the main switch to the printer
or copier OFF () immediately. Next, remove the power
plug of the printer from the outlet to avoid the danger of
fire or electrical shock and then contact your service
representative. If you do not take these steps, there is a
danger of fine or electrical shock. ...............................
ALWAYS contact your service representative for main-
tenance or repair of internal parts...............................
CAUTION
For safety purposes, ALWAYS turn the main switch to
the printer or copier OFF () and remove the power
plug of the printer or copier from the outlet when per-
forming cleaning operartions on the product. .............
DO NOT touch the tray when the product is working as
there is a danger of injury. ..........................................
If dust accumulates within the product, there is a dan-
ger of fire or other trouble. It is therefore recommended
that you consult with your service representative in re-
gard to cleaning of internal parts. This is particularly
effective if accomplished prior to seasons of high hu-
midity. Consult with your service representative in re-
gard to the cost of cleaning the internal parts of the
product. ......................................................................
Other precautions
DO NOT place heavy objects on the product or cause
other damage to the product.
When lifting or moving the product, contact your ser-
vice representative.
Do not touch electrical parts, such as connectors or
printed circuit boards. They could be damaged by static
electricity.
DO NOT attempt to perform any operations not ex-
plained in this handbook.
PRECAUTIONS FOR USE
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce Operations Guide Booklet Finisher at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce Operations Guide Booklet Finisher in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info