Manual Oce OP40 Operation Guide Printing System Functions (page 99 of 102) (English)

47575

Zoom out

Zoom in

1/102

3-6

3. Printer Driver for Macintosh

3-5 Printer Specific Options

■ Resolution:

Specifies the printing resolution (number of dots per inch) to be used when printing. Select between “600 dpi” and “300 dpi”. The factory

default setting is “600 dpi”.

■ Eco Print:

Turning this setting “On” allows you to save on toner use. The factory default setting is “Off”.

■ KIR:

Turning this setting “On” allows the jaggies that appear around the edge of text and graphics to be evened out through the smoothing

process. The factory default setting is “Off”.

■ PagePolicy:

Perform this setting in conjunction with the settings to be made under “Paper source” on page 3-4.

[Auto Size Select] ................................Select this setting when you want to select the source of paper feed according to the type of paper

(you are going to select “Auto Select” under “Paper source”).

[Cassette Base] ...................................Select this setting when you want to select the source of paper feed according to the tray under

“Paper source”.

* If you are going to select “Auto Select” under “Paper source”, be sure to select “Auto Size Select” here or there is a possibility that

printing will be accomplished onto paper that is difference the expected.

■ Job Storage:

Sets the printer driver type for code jobs under the Job Storage function.

■ Paper Destination:

Specifies the location of ejection. Depending upon which option you have installed, you can select between the Job Separator and the

Finisher.

[Inner Tray] ...........................................Copies will be ejected onto the Inner tray.

[Job Separator] .................................... Copies will be ejected into the optional Job Separator.

[Finisher] ..............................................Copies will be ejected into the optional Finisher.

[Mail Box] ............................................. Copies will be ejected into the optional Mail Box.

* In order to set the location of ejection for the Job Separator or Finisher, it is necessary to first perform the setting for that optional

equipment under “Installable options” in step 9 on page 3-3.

■ Staple:

It is possible to staple your copy sets if the optional Finisher is installed.

* The following settings are required before stapling is possible:

(1) Change the “Installable Options” setting in step 9 on page 3-3 to the following.

Select “Finisher” as the “Finisher” setting.

(2) “Printer Specific Options” setting on page 3-6.

Select “Finisher” as the “Paper Destination” setting.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP40 Operation Guide Printing System Functions in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oce OP40 Operation Guide Printing System Functions Manual

Product: